Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How To Down grade KX-NS300 V5 to V4

Status
Not open for further replies.

Rhiuz

Technical User
Apr 8, 2015
40
ID
Hello Master,

I need help how to down grade system KX-NS300 V5 to V4,

Problem 1.
Our customer do not want to change IP 172.168.10.1/24 ( because this not in range IP local 172.16.0.0-172.31.255.255 )
In V5 input ip 172.168.10.200(PBX), 172.168.10.201 (DSP)IP phone NT series can be register but for KX-HDV series cannot register to pbx.

I try diferent pbx NS300 V4.3 NT & HDV is running well.
so IT dosnt want to change their network MUST 172.168.10.200&172.168.10.201.

so how to down grade version V5 to V4 running their network.

warm regards
Rhiuz

 
Sounds like the hdv need upgrading. Or password may not be secure enough
Never heard of a software version being affected by a network IP range
 
Hello Obtsystem,


I try using V5 & V6 cannot register, because V6 if you wanna remote NS with port foward PBX webbase they need license remote in NS series that is the problem 172.168.10.200 is not local range.so i must downgrade V5/V6 to V4.5 can you?
 
No you don’t if you have port forwarding but your password has to be a proper mix of upper and lower case letters and numbers. I think off had it is 4 of each minimum
 
Obtsystem did you have V6 NS series? u can try in NS1000 using port wan with public ip then if you open with HTTPS their need license
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top