depends on the term setup in mail. most of us up the baud rate from the default 1200 so it matches the switch. crtl r repaints the screen, try 8 none and one at 12,24,48 and 9600 baud. if you use term emulation vt320, that allows the app to define the f keys, but on my procomm, f5 is the 1st soft key.
First at the ">" you need to put in "AX" then for the F keys go into keyboard editor, in Procomm Plus, and program the following; F6 as "^[[17~", F7 as "^[[18~",
F8 as "^[[19~", F9 as "^[[20~", and F10 as "^[[21~" (exclude the quotation marks). Then save the keyboard as whatever type of TTY you are using, I use VT102 but everyone has there own preference. Then F6 to F10 will work just like the terminal in the switchroom.
but mail programs those if your term type ends in 20.. i moved those to f1 thru f5 once and drove myself and everyone else crazy. i had for gotten about the ax, not a big opt 11 fan
Terminal: VT-102
Protocol: ZModem
Dara Options: Normal Options
Sctipts: [None]
Capture:[None]
Modem is set to....
Port Speed: 1200
Data Protocol: Standard EC
Compression: Enabled
Flow Control: Hardware
I seem to be able to get into the switch fine. But I cant get into Mail.
If I am at the terminal in the switchroom. I would turn on the terminal. Hit enter when testing flashes on the screen. Hit F4 then Control+r . This would bring up Meridian Mail.
But when I hit F4 in Procomm then Control+r. nothing happens. What am doing wrong?
the f4 connects to a diff port on the dumb term, you can't access the mail from that modem unless your in an opt 11 and have the aux tty port configured.. from the discription of the access steps you use in the switchroom, your using the term as two unique terms.. the modem connects to just the switch.. on a larger switch, you usually have a secondary modem, with an a b box, one for the term the other for the modem on the mail side.. mer has one maint port, since your using f4, it is connected to the term. that rules out the opt 11, that mail only uses the ax command.. get a second modem...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.