Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

help understanding 911 route

Status
Not open for further replies.
avayaaacc

avayaaacc

MIS
Jul 4, 2014
74
US
trying to find the missing piece herelist ars analysis does not have a dialed string of 11, but does 911, which has a call type of svcl and route pattern of 1

however, if I dial 911, and trace the trunk access code, I can see the following:
dial 911# route: ARS
route-pattern 9

if ars analysis shows a route pattern of 1 for 911, how is it going to route pattern 9? I must be missing something obvious
 
Sort by date Sort by votes
Could you display that part of the ARS table? I would be curious to see what it looks like. Do you put in a number to access the ARS table or are you just dialing 911 when you life the handset?

 
Upvote 0 Downvote
we just lift the handset and dial 911. For normal numbers we start with a 9 then the number.

display ars digit-conversion 11
matching pattern 11
min 2
max 2
del 2
replacement string 911
net ars
conv n

list ars analysis
dialed string 911
min 9
max 9
route pattern 1
call type svcl
ani req n

yet somehow tracing the call goes out route pattern 9, not 1
 
Upvote 0 Downvote
are you sure there is not an entry in ars for 11, then route pattern would insert the 9
 
Upvote 0 Downvote
Status the station, See what Network Region the Station is in, Look at the Network Region to determine the location, display ars analysis 911 location X where X is the location from the network region.
 
Upvote 0 Downvote
no entry in ARS for 11. All entries in ARS show a route pattern of 1 - is this a bug?

list ars analysis Page 1

ARS DIGIT ANALYSIS REPORT

Location: all

Dialed Total Route Call Node ANI
String Min Max Pattern Type Number Req

13062228173 11 11 deny fnpa n
2 7 7 1 hnpa n
3068194327 10 10 deny fnpa n
3 7 7 1 hnpa n
4 7 7 1 hnpa n
5 7 7 1 hnpa n
6 7 7 1 hnpa n
611 3 3 1 svcl n
7 7 7 1 hnpa n
8 7 7 1 hnpa n
811 3 3 1 svcl n
2819531 7 7 deny hnpa n
9 7 7 1 hnpa n
911 3 3 1 svcl n

display ars analysis 911 location X presents:
"Multiple locations feature not assigned
 
Upvote 0 Downvote
do a list locations and if you have some for example cha ars ana 11 location 2, the entry could be in a location table
 
Upvote 0 Downvote
list locations shows 4 locations, location numbers 1, 2, 3 and 4

however, if I try "cha ars ana 11 location 1" or 2, 3, or 4, it each returns:
Multiple locations feature not assigned
 
Upvote 0 Downvote
the strange thing is that ars ana 11 shows 911 using route 1. But if I trace a call to 911 it uses route 9

display ars analysis 11 Page 1 of 2
ARS DIGIT ANALYSIS TABLE
Location: all Percent Full: 3

Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
14893572351 11 11 deny fnpa n
2 7 7 1 hnpa n
4893572349 10 10 deny fnpa n
3 7 7 1 hnpa n
4 7 7 1 hnpa n
5 7 7 1 hnpa n
6 7 7 1 hnpa n
611 3 3 1 svcl n
7 7 7 1 hnpa n
8 7 7 1 hnpa n
811 3 3 1 svcl n
2815798 7 7 deny hnpa n
9 7 7 1 hnpa n
911 3 3 1 svcl n
n

 
Upvote 0 Downvote
Is that your complete ARS table? Interesting thing is that I don't see a route pattern 9 in there. Do you have something setup for route pattern 9?

 
Upvote 0 Downvote
If it doesn't show up in your aar table, I'm willing to bet that your 911 is set up as a VDN. Do a list vdn and look for 911.

 
Upvote 0 Downvote
Full ars below. When I look at route pattern 9 I can see that's how it gets to the current trunk. My goal is to change the delivery of these calls to another trunk

nothing for 11 or 911 in list vdns :(

list ars analysis Page 1

ARS DIGIT ANALYSIS REPORT

Location: all

Dialed Total Route Call Node ANI
String Min Max Pattern Type Number Req

15555555555 11 11 deny fnpa n
2 7 7 1 hnpa n
5555555555 10 10 deny fnpa n
3 7 7 1 hnpa n
4 7 7 1 hnpa n
5 7 7 1 hnpa n
6 7 7 1 hnpa n
611 3 3 1 svcl n
7 7 7 1 hnpa n
8 7 7 1 hnpa n
811 3 3 1 svcl n
5555555 7 7 deny hnpa n
9 7 7 1 hnpa n
911 3 3 1 svcl n


list aar
list aar analysis Page 1

AAR DIGIT ANALYSIS REPORT

Location: all

Dialed Total Route Call Node ANI
String Min Max Pattern Type Number Req

333 6 6 98 aar n
334 6 6 200 aar n
335 6 6 98 aar n
3 7 7 254 aar n
4 7 7 254 aar n
5 7 7 254 aar n
555 6 6 110 aar n
6 7 7 254 aar n
660 3 3 201 aar n
676 6 6 111 aar n
661 3 3 99 aar n
7 7 7 254 aar n
757 3 3 201 aar n
8 7 7 254 aar n
9 7 7 254 aar n
 
Upvote 0 Downvote
well at this point just modify route pattern 9 to mirror route pattern 1, someone is weird as I cannot see how it would go out on route pattern 9
 
Upvote 0 Downvote
The bizarre piece is that route pattern 1 is empty. No config if I run display route pattern 1
 
Upvote 0 Downvote
it has to be going out on another ars location table then
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

tweege
  • Question
Automatically bridge/observe 911 calls 1
Replies
4
Views
876
JefferP
JefferP
Stinney
  • Locked
  • Question
Number of Concurrent Calls to 911
Replies
4
Views
206
phoneguy55
phoneguy55
jimha
  • Locked
  • Question
HELP - denial event 1751: No AAR/ARS route 1
Replies
1
Views
628
Sean655
S
Y
  • Locked
  • Question
AMS Wav to CM? Help please
Replies
6
Views
456
YDCTwinkleToes
Y
mnealtx
  • Locked
  • Question
Help with decommissioning Avaya G3R
Replies
7
Views
196
mnealtx
mnealtx

Part and Inventory Search

Sponsor

Back
Top