Gmail using embedded voice mail Version 9.0 3

[tobyroth]

Does anyone have some actual working Gmail setup instructions for IPO 9.0 using Embedded Voice Mail. I have searched and there are several posts but the instructions are not working.

Thank you!

 

[tobyroth]

Follow Up:

I found this thread for Embedded email to Gmail, followed it and still not able to send emails out, I even set up a " 2 STEP" password with Gmail:

http://www.tek-tips.com/faqs.cfm?fid=7729

 

[amriddle01]

I do it the same way and it works just fine, I guess you have something else wrong/effecting it

 

[tobyroth]

Oh well good for you I am glad to hear that your not having any trouble.

 

[amriddle01]

But those are the correct instructions, what else do you expect us to say? I was making the point that it's not this part that is wrong so you need to look elsewhere for an issue....

 

[tobyroth]

Oh, I see.

 

[EmuDan]

Have you upgraded to the latest 9.0.5 version? If not, I would give that a try.

Dan

I blame Avaya.

 

[IPGuru]

* for Dan as the release notes for 9.0.5 say it is a fixed issue.

A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear

 

[AACon]

I have it working just peachy on 9.0.4 with embedded.
SMTP.gmail.com
Port 587, STARTTLS enabled, then of course email address and password.
No issues here.

-Austin
ACE: Implement IP Office

 

[PhoneGuy61]

Works great on a 9.0.3 system for me.....
Peaches excluded...

 

[snowman50]

Check your security settings..http change to unsecured

The new security default setting by avaya have set this to secure high.
You may have to lower it to allow the email out.

 

[tobyroth]

I have 9.0.3. I will check the security settings.

 

[tobyroth]

Do I have to pay for an additional license to go from 9.0.3 to 9.0.5?

 

[Gunnaro]

Nope, just download and fire away

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam

 

[tobyroth]

I am not sure how to change my HTTP setting I could not find this in Manager. Could you tell me where to look.

 

[Gunnaro]

File> Advanced> Security settings...

Login with Username: security
Pwd: securitypwd (or whatever you changed it to in the past.)

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam

 

[chrisag]

Did any of you guys did with vmpro on windows 7.

 

[tobyroth]

I found 2 of then under SERVICES READ and WRITE

 

[tobyroth]

Thank you, as soon as I turned off the HTTP it started working. Perhaps the FAQ could be updated since this step was left out.

Thank you

 

[snowman50]

Glad to see the http security setting fixed it..