I'm in the middle of a transition from HiCom 300 to a Cisco IP, I need to get the E1 details tha we have in the current HiCom system, anyone can help with which AMO should I run to get that information?
If this is a CAS circuit then it will be configured using AMO-TACSU;
If you DIS-BUEND; this will display all the trunk groups configured in the system.
Ok, I just get the trunk groups and some the info with TACSU and BUEND, now, how can I get details from the circuit, to be more specific, I need this info:
Line Coding:
Framing:
Clocking:
PRI Protocol type:
Global ISDN type:
This is what I get with the AMO BUEND:
<DISPLAY-BUEND;
DISPLAY-BUEND;
H500: AMO BUEND STARTED
TRUNK GROUPS
NO. NAME
1 TELMEX-DIGITAL
2 TRONCAL ANALOGICA
4 ANALOG 291507
5 ANALOG 291617
6 TRONCAL ANALOGICA
8 TELMEX-RDI
9 BACK-UP
100 ENLACE HICOM100
101 ENLACE HICOM100
102 ENLACE HICOM100
103 ENLACE HICOM100
104 ENLACE HICOM100
200 E1 LINK
Thanks for the help do you know where I can find something to help me understand the codes, I dont have the manual (the guy who was in charge of phones doesnt left anything) this has been a very tought task, I'm doing this without documentation and I really doesnt have much experience on this kind of PBX, so all the help you can gave me is welcome.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.