Field telephone

[tamoukh]

hello:
I have got avery bg problem.
i want to connect a russian field telephone ( TA57 ) to meridian1 opt11 so can any one help me to do it?

 

[phones1]

What help do you need? whats the spec of set, Eg expected line voltage? the set termination (Rj11/ Rj45)? or do you need just to set up an Analog extn?

Remember if it doesn't work hit it harder

Scott UK

 

[johnpoole]

make it an analog, cls mnl ftr hot d 4 xxxx to the console.. unless the dial pad is compatable.. if it's a rotary model, then skip mnl and use cls dip

john poole
bellsouth business
columbia,sc

 

[johnpoole]

if your sidetone is a little loud, then your rec may be distorted.. use a resister to drop the voltage.. unless things have changed that is a lower voltage unit.. it will not hurt to operate it at a higher voltage..

john poole
bellsouth business
columbia,sc

 

[tamoukh]

hello every body:
the broblem am handelling that i want to connect a field telephone ( TA-57 ) to my meridian1 system for military purpose with no voltage on the line from the PABX but just ring signal with 48v ( LB )type so can you help me?
with my best regards

 

[sjm64]

Go I.P wireless (2212)

 

[acewarlock]

Take the Battery out of the phone and hook it to a 500 type line card and program it as a Hot line to the Operator or some where else.

 

[johnpoole]

ace nailed it.. every field phone i've played with worked either local battery or common battery.. a ringdown would negates the need for a dial..

the 1st phone i installed was a common battery and had a crank on the side... and that phone will still work on a nortel.. connected to a trunk card

john poole
bellsouth business
columbia,sc

 

[thattekguy]

Shocking fish with the old Mag's is always fun.

 

[tamoukh]

thank you:
i connect the field telephone to the trunk card but what about the ring to the telephone?
i want to send a ring to the field telephone.
so do you solved this problem?

 

[acewarlock]

Did you read my post above???????????

 

[tamoukh]

hello:
the problm that i do not want to get any power from the PABX on the line so that why i used the trunk

 

[acewarlock]

Than your not going to be able to call it as there is no way to send ringing current.

 

[tamoukh]

that is my problem my friend so can you help me?

 

[johnpoole]

to send ring voltage to the station.. build your trunk as a cot, start type imm.. the build a rlb pointing to that route, then add a dsc pointing to the rlb.. might need to play with start type but that is the way i would attempt to build a workaround..

you can't switch the field phone to common battery? i know local battery is what makes field phone work but the ones i played with could use the common battery mode..

ta-312 (1969-76) usmc

john poole
bellsouth business
columbia,sc

 

[acewarlock]

Can I ask why you don't want to use the Bat on the PBX?

 

[tamoukh]

because we are working with security PABX so we cant get the bat on the PABX for secuity

 

[DocVic]

Your TA57 will not work with the Meridian!!!!!

DocVic

 

[acewarlock]

Why do you say that DocVic????

 

[tamoukh]

hello:
the TA-75 worked with the meridian on the co trk for incoming but the he problem is to send a ring voltage to it i tried what lohnpool send but the problem is that idiid not found the start on trunk programming but just in the NTPs