disabledflaw
IS-IT--Management
Does anyone know the feature code for make busy on 3300? Also how I can find the IP address of the ICP from the telset?
Thank you!
Thank you!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Feature Code for Make Busy on 3300 1
- Thread starter disabledflaw
- Start date
- Status
-
1
- #2
Feature access codes on the Mitel are blank by default so the installer will have set them up.
You can find the ip address of an operational phone by accessing the debug menu.
1.Press and hold the Volume Up key.
2.Press and hold the Volume Down key.
3.Release the Volume Up key.
4.While still pressing the Volume Down key, dial cfg on the keypad.
5.Release the Volume Down key.
You can find the ip address of an operational phone by accessing the debug menu.
1.Press and hold the Volume Up key.
2.Press and hold the Volume Down key.
3.Release the Volume Up key.
4.While still pressing the Volume Down key, dial cfg on the keypad.
5.Release the Volume Down key.
^^ You will see the ICP address follwoing the above method.
Alternatively if you remove power from the phone (usually by disconnecting the network cable from the back of the phone) and reconnect the cable, the phone will boot up and will show the ICP address buring bootup sequence.
Alternatively if you remove power from the phone (usually by disconnecting the network cable from the back of the phone) and reconnect the cable, the phone will boot up and will show the ICP address buring bootup sequence.
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question