We have a need to enable media encryption on all of our voice traffic that did not happen during the install of our new system. I am still learning the ropes and having trouble getting this enabled.
I have checked display system-parameters customer-options and found Media Encryption Over IP? set to y
So I went ahead and moved my extension to a test network region and set a new codec to use G.711MU with media encryption set to aes
Now when I pick up the handset I receive no dial tone and below is a list trace on the station. Any guidance on what im missing would be very helpful.
I have checked display system-parameters customer-options and found Media Encryption Over IP? set to y
So I went ahead and moved my extension to a test network region and set a new codec to use G.711MU with media encryption set to aes
Now when I pick up the handset I receive no dial tone and below is a list trace on the station. Any guidance on what im missing would be very helpful.
Code:
LIST TRACE
time data
10:53:19 TRACE STARTED 10/01/2015 CM Release String cold-03.0.124.0-22450
10:53:22 denial event 1644: Orig block/invalid digits D1=0xa6 D2=0xb103a38
10:53:22 active station 1293 cid 0x3a38
10:53:22 denial event 3731: Incompatible caps for end D1=0x7f00007f D2=0xa6
10:53:22 denial event 2300: Ept capabilities mismatch D1=0x4 D2=0x4