Embedded Voicemail Access 1

[optionsleft]

Just starting to learn IPO. With source numbers in the user tab, access to voicemail doesn't need access code. Removed source numbers and I am being asked for the code. My question is if i want to access my VM in other user/extension, how to setup if i want to ask for a user/ext number and VM access code?

 

[jvercarreshaw]

Create a Short Code in The IP Office Manager as below:

Code=*99
Feature=Voicemail Collect
Telephone Number=?

Then dial *99 from any phone and enter:
extension#
passcode#

Best, John.

 

[optionsleft]

Thanks John.

 

[quasiplanter]

Set up the following 'Shortcode' which will allow access to ANY mailbox, you will be prompted for the 'Extension' number followed by the Password :

SC = *55 (or any spare code)
Feature = Voicemail Collect
Telephone Number = "?Anonymous

 

[puregold]

quasi

Embedded uses just ?, not ?anon etc, anon is for VM pro only and doesnt work on embedded.

ACE - Avaya Certified Expert
ACI - Avaya Certified Instructor

 

[Escorthosis]

And when you are new to IPOffice: read a lot.
The manuals are from Avaya are pretty good.

http://support.avaya.com/elmodocs2/ip_office/R4.0/Embedded_Voicemail_Installation.pdf

I used the same source today for exactly the same question and found the answer on page 22.

 

[ProviderReborn]

And another fantastic source for every thing IP Office.

http://marketingtools.avaya.com/knowledgebase/

Brilliant source.

ACA - IP Office Implement
ACA - IP Telephony
ACS - IP Office Implement
CCNA - Working towards.

 

[intrigrant]

Did you read this as well:

http://marketingtools.avaya.com/kno...mergedProjects/productdescription/changes.htm

NIHIL NOVI SUB SOLE