Dual PRI 's MICS XC7.0

[JetKC]

I am adding a second PRI on a XC 7.0 MICS and wanted to use a T/M but I am only using the one combo card. Is a second combo required? Can I also skip the 2nd slot in MICS as I use it for an analog backdoor. (LS/DS). thanks

 

[hawks]

1 combo is all you need but I would put the 2 PRI's in the main cab and move the analog to the TM.

 

[JetKC]

Thanks...I appreciate the help. we removed all T/M when we cut over PRI. so i can use any open fiber port? 13,14 should work?

 

[curlycord]

Last 2 ports are for Station Modules.....previously for Campanions

=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[exsmogger]

Trunk mods can only be connected to fiber ports 3-8. Station mods can go on 3-14. Also, if you put a digital trunk card in a trunk module it must be the NT7B74AAAA. The older model NT7B75GA only works in the main cabinet.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[JetKC]

thanks...what issues are there if i keep the ls/ds in MICS(mod 2) and add PRI( yes i have newer 74 card) in T/M? Also, does set relocation work if i move station or ASM from one port to another? So i can make room for PRI in T/M/ PORTS 7 OR 8.This customer has support and we use a POTS to log in on RAD if PRI goes down for backup.Any other ideas or suggestions are greatly appreciated.