Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DID intercept issue

Status
Not open for further replies.

Klees

Technical User
Jun 10, 2008
190
US
my intercept treatment is an announcment its in an audio group and I can dial it and hear it. any call to a non programmed station is giving me a second of static then disconnect. Any thoughts?
 
disp sys feat, page 1. What does 'DID/Tie/ISDN/SIP Intercept Treatment' say?
 
the intercept is the announcement number. When I trace the tac I get the 1751 denial No AAR/ARS route pat/pref
 
odd. Does 'disp dial par' show 'UDP table first' under 'UDP Extension Search Order'? If so, then check 'list unif' to see if your announcement number is matching and going to AAR or ARS.
 
dial para shows local extension first
under list unif i dont see my announcement number in there... perhaps this is the issue?
my extension range it 6000 to 6999 some are in use but others are not.
 
klees said:
dial para shows local extension first

Thats not it then. Next guess, delete and re-record the announcement and/or 'cha sys feat' and set your intercept treatment to send the call to a VDN with a vector that is wait 1 sec hearing silence then disconnect after ann 1234.
 
I tried with the VDN no luck. I am dialing by extension. here is the trace ( cant copy and paste, I work on 2 different laptops)
3. collect 4 digits after ann xxxx for none
4. route to digits with coverage Y
denial even 1751: no AAR/ARS route pat/pref
5. stop

It doesn't even acknowledge that I have entered any digits...
I love a stumper.. but this on is getting on my nerves. thanks

If i dial a good number this is the trace:

4. route to digits with coverage Y
5. Leaving vector processing
dial xxxx (programmed station)
ring station
 
what if you change your intercept treatment to a station with a phone? (for testing) Then dial a DID in range with your DID block and no station assigned. Keep it simple.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Hey sorry you can only assign an announcement, attendant or vdn. None work I even tried another announcement.
 
Post output from "display dialplan parameters"

check for ETA

Code:
change dialplan parameters                                      Page   1 of   1
                             DIAL PLAN PARAMETERS

                 Local Node Number: 12                  ETA Node Number: 2
   UDP-ARS Calls Considered Offnet? n               ETA Routing Pattern: 202
        UDP Extension Search Order: udp-table-first

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
DIAL PLAN PARAMETERS
Local Node Number: 1 ETA Node Number:
UDP-ARS Calls Considered Offnet? n ETA Routing Pattern:
UDP Extension Search Order: local-extensions-first
Location-Based Call Type Analysis? n
Call Type Analysis Behavior When Extension Not Assigned: try-next-choice

 
Ok, done, I am getting the same denial event. 1751 no AAR/ARS route pat/pref
 
Can you post your trace?
Can you post display dialplan analysis?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
3 collect 4 digits after annc xxxxx for none
16:27:58 3 announcement: board 03A06 ann ext: xxxxxx
16:27:58 active announcement xxxxxx cid 0x1c1b
16:27:58 hear audio-group 1 board 03A06 ext xxxxx cid 0x1c1b
16:28:08 4 route-to digits with coverage y
16:28:08 denial event 1751: No AAR/ARS route pat/pref D1=0x830002 D2=0xa695000



0 1 attd # 3 dac
1 4 ext #90 4 dac
2 4 ext
3 4 ext
4 4 ext
5 4 ext
6 4 ext
7 4 ext
8 4 ext

9 1 fac
* 3 dac
 
looks like incoming on TG2 immediately listening to annc on 3a06
the denial comes with route to digits

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Yep, but if I chose a programmed extension it goes just fine... stumped!
 
well now, I finally figured it out. The intercept treatment works for DID's dialed into the switch, not for internal dial by extension treatment. I added a step in the vector to
"go to step 6 if unconditional"
6. disconnect after annoucment xxxx
uggggg!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top