Creating a Hunt Group

[Camper66]

H,

I have followed the steps below in order to access the Hunt Group:

**266344
System Programing
Hunt Group

I do see Change DNs,Feature Settings, Direct Dial, CAP assig, ETC...

However, nowhere in the sub-section can I find Hunt group.

I'm sure I have an older software version; could that mean it is programmed somewhere else?

 

[silver987]

I don't think there were hunt groups before rel 4.1

http://www.silverlakecom.com

 

[exsmogger]

Is your system at least 3-digit DNs? If it's 2-digit you won't see programming for hunt groups.

Brian Cox

http://www.jandjcommunications.com

 

[Camper66]

Hi exsmogger,

So it would seem that is I re-numbered my 2-digit DN's t0 3, I would see it? Or changing more then that ?

 

[fireeater]

if your dn's are 3 digit or more and you have the right software level you would see it

what system and software level do you have


All Things Are Possible With Time And Lots And Lots of Money

mike

http://www.ics-on.ca

 

[Camper66]

Hi fireeater, good question but I sorry don't know..

 

[fireeater]

well if thats the case
the only thing i can think of is
if you go into programming and see terminals and sets as first heading (thats good )if you see configuration (out of luck)

so if terminals and sets go to system then the next heading (or two) will say hunt groups (if no see) then software too old


All Things Are Possible With Time And Lots And Lots of Money

mike

http://www.ics-on.ca

 

[curlycord]

1. If your ext 222 your 3 digit DN's, if your x22 your 2 digit DN's.

2. If you cycle to maintenance/system version and note the SP number we will give you the software version you have.


=--(((((((((()--=
curlycord

http://www.curlycord.com

 

[Camper66]

It reads is :


SP 30NgG13NAT

 

[curlycord]

You have 4.1 CICS

Ok so what is answer for #1? 2 or 3 digit DN's?




=--(((((((((()--=
curlycord

http://www.curlycord.com

 

[Camper66]

I use 2 digit DNs; that much I know : )

 

[curlycord]

Then that is why you dont see Hunt Groups.

Change system to 3 digits, note that voice mail would need to be re-programmed.

Or go with the Answer DNs

=--(((((((((()--=
curlycord

http://www.curlycord.com

 

[Camper66]

curlycord,

You mean the paths will have to be re-programmed, correct ?

 

[curlycord]

Yes the whole voice mail system.

Stupid thing Nortel did, but also a rookie mistake by a tech not to put you at 3 digits if they could have.


=--(((((((((()--=
curlycord

http://www.curlycord.com