Magnus1on1
MIS
Does any one know where I can get a list of all the Cls of service for the sets for the cs1000 pbx's??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cls of Service Question
- Thread starter Magnus1on1
- Start date
- Status
john poole
bellsouth business
columbia,sc
can help you
____________________________________________________________
CLS Commands
1. UNR:
Unrestricted .only UNR is allowed for CO, FX and WATS trunks.
UNR is the defaults for all trunks types expect TIE, CSA, ATVN, FGD and IDA.
2. WTA:
Warning tone allowed.
3. WTD:
Warning Tone Denied.
4. FBA:
Call Forward Busy allowed.
5. FBD:
Call Forward Busy Denied.
6. FNA:
Call Forward No answer allowed.
7. FND:
Call Forward No answer Denied.
8. HBTA:
Hunting by call type allowed.
9. HBTD:
Hunting by call type Denied.
10. HTA:
Hunting Allowed.
11. HTD:
Hunting Denied.
12. MWA:
Message Waiting allowed.
13. MWD:
Message Waiting Denied.
14. SFA:
Second level call Forward No answer allowed.
15. SFD:
Second level call forward No answer Denied.
16. LPR:
Low priority station.
17. LPA:
Message waiting lamp allowed.
18. LPD:
Message waiting lamp Denied.
19. PUA:
Call pickup allowed.
20. PUD:
Call Pickup Denied.
21. MTA:
Maintenance Telephone allowed.
22. MTD:
Maintenance Telephone Denied.
23. TDD:
Touch Phone Display.
24. CRPA:
Corporate Directory allowed.
25. CRDD:
Corporate Directory Denied.
26. STSA:
Set-to-Set messaging allowed.
27. STSD:
Set-to-Set messaging denied.
28. LLC 1:
Line load control 1
29. LLC 2:
Line load control 2
30. LLC 3:
Line load control 3
31. LLCA:
Line load control allowed.
32. LLCN:
Line load control off.
33. LMPN:
Red LED on meridian modular telephone reflects the status of the mailbox associated with the PDN.
34. LMPX:
Red LED on meridian Modular telephone reflects the status of the mailbox associated with the PDN and Non PDNs.
35. LNA:
Last number redial allowed.
36. LND:
Last number redial denied.
37. LNK:
Last number redial Key.
38. RMMO:
Allow remote monitoring of message and to override, if it is being already monitored.
39. RMMA:
Remote monitoring of message allowed.
40. RMMD:
Remote monitoring of message denied.
41. RDLA:
Automatic redial call allowed.
42. RDLD:
Automatic redial call denied.
43. RGA:
Ring again Key.
44. RLFA:
Reserved camp flash allowed.
45. RLFD:
Reserved camp flash denied.
43. RLS:
Release Key.
44. RLT:
Redial list Key.
45. RMWK:
Remote message waiting indication key.
46. RNP:
Ringing number pickup.
(Includes PUA, PUD and RNPK)
47. RNPK:
Ringing number pickup key.
48. RPA:
Radio paging allowed.
49. SMWA:
Extended message waiting indication allowed.
50. SMWD:
Extended message waiting indication denied.
51. SNR:
Stored number redial.
52. SPKA:
Speaker class of service allowed.
53. SPKD:
Speaker class of service denied.
54. SWA:
Station – to – Station call waiting allowed.
55. SWD:
Station – to – Station call waiting denied.
56. TAD:
Time and Date Key.
57. AAA:
Automatic answer back allowed.
(Automatic answer back can be used on M2112, M2317, M2616, M3000 and
SL-1 telephones with hands free capability. A special hardware kit is required for SL-1 sets and companion 4 speaker phones.
Automatic answerback must have-CLS=HFA for M2616 telephones. CLS AAA (or) AAK keys are not allowed for M2317 TNs.
58. AAD:
Automatic answer back denied.
59. ABDA:
Abandoned call record and time to answer allowed.
60. ABDD:
Abandoned call record and time to answer denied.
61. ADD:
Automatic digital display default for M2008, M2216, M2317, M2616, M3000, M3902, M3904 and M3905.
62. DDS:
Delay Display, Display activates after call is answered.
63. IMA:
Integrated messaging service attendant allowed.
64. IMD:
Integrated messaging service attendant denied.
65. ICDA:
Internal call detail recording allowed.
66. ICDD:
Internal call detail recording denied.
67. IPNA:
Intercept position allowed.
68. IPND:
Intercept position denied.
69. IRA:
Incoming ringing line preference allowed.
70. IRD:
Incoming ringing line preference denied.
71. XHA:
Exclusive hold allowed.
72. XHD:
Exclusive hold denied.
73. HSPA:
Hospitality management allowed.
74. HSPD:
Hospitality management denied.
75. NIA:
Incoming non-ringing line preference allowed.
76. NID:
Incoming non-ringing line preference denied.
77. OLA:
Outgoing line preference allowed.
78. OLD:
Outgoing line preference denied.
79. OCBA:
Outgoing call barring allowed.
80. OCBD:
Outgoing call barring denied.
81. VCE:
Voice set.
82. DRG1:
High fast tone, frequency 667 HZ/500 HZ warble rate 10.4 HZ.
83. POA:
Optional privacy allowed.
84. POD:
Optional privacy denied.
85. PRSA:
Priority call pickup allowed.
86. PRSD:
Priority call pickup denied.
87. DSI:
Data service access or IS server TN allowed.
88. DSX:
Data service access or IS server TN denied.
89. VMA:
Server voice message allowed.
90. VMD:
Server voice message denied.
91. CMSA:
Command and status link allowed.
92. CMSD:
Command and status link denied.
93. CNIA:
Call number information allowed.
94. CNID:
Call number information denied.
95. CCSA:
Controlled class of service allowed.
96. CCSD:
Controlled class of service denied.
97. CCOS:
Controlled class of service Key.
98. CDCA:
Conferee Display count allowed.
99. CDCD:
Conferee Display count denied.
100. CNDA:
Call party name display allowed.
101. CNDD:
Call party name display denied.
102. CFTA:
Call forward by call type allowed.
103. CFTD:
Call forward by call type denied.
104. SFA:
Second level forwarding allowed.
105. SFD:
Second level forwarding denied.
106. MRA:
Message Registration allowed.
107. MRD:
Message Registration denied.
108. ADV:
Data port verification allowed.
109. DDV:
Data port Verification denied.
110. CNIA:
Call number identification allowed.
111. CNID:
Call number identification denied.
112. MSIA:
Make set busy improvement allowed.
113. MSID:
Make set busy improvement denied.
114. DAPA:
Display access prefix allowed.
115. DAPD:
Display access prefix denied.
116. BFEA:
Boss secretary filtering enhancement allowed.
117. BFED:
Boss secretary filtering enhancement denied.
118. RCBA:
Recall to boss allowed.
119. RCBD:
Recall to boss denied.
120. ICDA:
Internal call detail recording allowed.
121. ICDD:
Internal call detail recording denied.
122. CDMA:
CDMA allows external station activity records to be generated for the set.
123. CDMD:
CDMD denies external station activity to be generated for the set.
124. MCTA:
Malicious call trace allowed.
125. MCTD:
Malicious call trace denied.
126. CLBA:
Active calling party number and name per-line blocking.
The user may still request CPP by dialing the CPP code.
127. CLBD:
Deactive calling party number and name per-line blocking.
128. AUTU:
Unrestricted Authorization code class of service.
129. AUTD:
Denied Authorization code class of service.
130. AUTR:
Restricted Authorization code class of service.
(When the CLS is changed from AUTR to AUTU or AUTD, all previous telephone authorization code information is removed.)
This class of service is valid only when station specific Authorization codes (SSAU) package 229 is equipped.
131. GPUA:
Group call pickup allowed.
132. GPUD:
Group call pickup denied.
133. DPUA:
DN Pickup allowed.
(DN pickup is not allowed on telephones in group Zero (RNPG=0). Must have directed call pickup (DCP) package 115.
134. DPUD:
DN Pickup denied.
135. DNDA:
Dialed Name Display allowed.
136. DNDD:
Dialed Name Display denied.
137. CFXA:
Call forward to External DN allowed.
138. CFXD:
Call forward to External DN denied.
139. ARHA:
Audible remainder of held call allowed.
140. ARHD:
Audible remainder of held call denied.
141. CLTA:
Network call trace allowed.
142. CLTD:
Network call trace denied.
143. ASCA:
Alarm security allowed.
(Mutually exclusive with three-party service allowed (TSA).
144. ASCD:
Alarm security denied.
145. CPFA:
Forced camp-on from another set allowed.
146. CPFD:
Forced camp-on from another set denied.
147. CPTA:
Forced camp-on to another set allowed.
148. CPTD:
Forced camp-on to another set denied.
149. ABDA:
Abandoned call record and time to answer allowed.
150. ABDD:
Abandoned call record and time to answer denied.
151. CFHA:
Call Forward Hunt override allowed.
152. CFHD:
Call Forward Hunt override denied.
153. FICA:
Forward intercom calls allowed.
154. FICD:
Forward intercom calls denied.
155. NAIA:
No Answer identification allowed.
156. NAID:
No Answer identification denied.
157. NAMA:
Name display on other set allowed.
158. NAMD:
Name display on other set denied.
159. RNGI:
Apply ringing when idle but off hook.
160. RNGB:
Apply ringing when idle but off hook or busy on the other line.
161. AGRA:
Agent Greeting allowed.
162. AGRD:
Agent Greeting denied.
163. AHA:
Automatic Hold allowed.
164. AHD:
Automatic Hold denied.
165. MOAA:
Mute on Answer allowed.
166. MOAD:
Mute on Answer denied.
167. MINA:
Message Interrupt allowed.
168. MIND:
Message Interrupt denied.
169. UDI:
Station is (not) restricted from receiving DID calls.
170. RDI:
Station is restricted from receiving DID calls.
171. RCC:
Restricted form receiving collect calls.
172. DDGA:
DN Display on other set allowed.
173. DDGD:
DN Display on other set denied.
174. PRSA:
Priority call pickup allowed.
175. PRSD:
Priority call pickup denied.
176. NRWA:
Call waiting Night class restriction allowed.
177. NRWD:
Call Waiting Night class restriction denied.
178. NRCA:
Forced camp-on night class restriction allowed.
179. NRCD:
Forced camp-on night class restriction denied.
180. NROA:
Priority override night class restriction allowed.
181. NROD:
Priority override night class restriction denied.
182. DRDA:
Distinctive ringing by directory number allowed.
183. DRDD:
Distinctive ringing by directory number denied.
184. USRA:
User selectable call redirection allowed.
185. USRD:
User selectable call redirection denied.
186. ULAA:
Set based Administration user access allowed.
187. ULAD:
Set based Administration user access denied.
188. RTDA:
Call redirection by time of day allowed.
189. RTDD:
Call redirection by time of day denied.
190. RBDA:
Redirection by day allowed.
191. RBDD:
Redirection by day denied.
192. RBHA:
Redirection by Holiday allowed.
193. RBHD:
Redirection by Holiday denied.
194. PGNA:
Allow PAGENET access.
195. PGND:
Deny PAGENET access.
196. FLXA:
Flexible Voice/Data TN allowed.
197. FLXD:
Flexible Voice/Data TN denied.
198. FTTC:
Flexible Trunk to Trunk Connections Conditional.
199. FTTR:
Flexible Trunk to Trunk connections restricted.
200. FTTU:
Flexible Trunk to Trunk connections Unrestricted.
201. DNDY:
Diversion notification with called party’s number and name when available.
202. DNDN:
Diversion Notification Without called party’s number and name.
203. DNO3:
Diversion Notification option with diverted-to party’s number and name when available.
204. MCBN:
Set linked to a Non-MICB line card.
205. MCBY:
Set linked to a MICB line card.
206. FDSA:
Force disconnect allowed.
207. FDSD:
Force Disconnect denied.
208. NOVA:
Network Override / Break-in allowed.
209. NOVD:
Network Override / Break-in denied.
210. HTYP:
(Hunting Type)
LIN- Linear hunting
RRB- Round Robin Hunting (Prompted when USE=GPHT).
____________________________________________________________
CLS Commands
1. UNR:
Unrestricted .only UNR is allowed for CO, FX and WATS trunks.
UNR is the defaults for all trunks types expect TIE, CSA, ATVN, FGD and IDA.
2. WTA:
Warning tone allowed.
3. WTD:
Warning Tone Denied.
4. FBA:
Call Forward Busy allowed.
5. FBD:
Call Forward Busy Denied.
6. FNA:
Call Forward No answer allowed.
7. FND:
Call Forward No answer Denied.
8. HBTA:
Hunting by call type allowed.
9. HBTD:
Hunting by call type Denied.
10. HTA:
Hunting Allowed.
11. HTD:
Hunting Denied.
12. MWA:
Message Waiting allowed.
13. MWD:
Message Waiting Denied.
14. SFA:
Second level call Forward No answer allowed.
15. SFD:
Second level call forward No answer Denied.
16. LPR:
Low priority station.
17. LPA:
Message waiting lamp allowed.
18. LPD:
Message waiting lamp Denied.
19. PUA:
Call pickup allowed.
20. PUD:
Call Pickup Denied.
21. MTA:
Maintenance Telephone allowed.
22. MTD:
Maintenance Telephone Denied.
23. TDD:
Touch Phone Display.
24. CRPA:
Corporate Directory allowed.
25. CRDD:
Corporate Directory Denied.
26. STSA:
Set-to-Set messaging allowed.
27. STSD:
Set-to-Set messaging denied.
28. LLC 1:
Line load control 1
29. LLC 2:
Line load control 2
30. LLC 3:
Line load control 3
31. LLCA:
Line load control allowed.
32. LLCN:
Line load control off.
33. LMPN:
Red LED on meridian modular telephone reflects the status of the mailbox associated with the PDN.
34. LMPX:
Red LED on meridian Modular telephone reflects the status of the mailbox associated with the PDN and Non PDNs.
35. LNA:
Last number redial allowed.
36. LND:
Last number redial denied.
37. LNK:
Last number redial Key.
38. RMMO:
Allow remote monitoring of message and to override, if it is being already monitored.
39. RMMA:
Remote monitoring of message allowed.
40. RMMD:
Remote monitoring of message denied.
41. RDLA:
Automatic redial call allowed.
42. RDLD:
Automatic redial call denied.
43. RGA:
Ring again Key.
44. RLFA:
Reserved camp flash allowed.
45. RLFD:
Reserved camp flash denied.
43. RLS:
Release Key.
44. RLT:
Redial list Key.
45. RMWK:
Remote message waiting indication key.
46. RNP:
Ringing number pickup.
(Includes PUA, PUD and RNPK)
47. RNPK:
Ringing number pickup key.
48. RPA:
Radio paging allowed.
49. SMWA:
Extended message waiting indication allowed.
50. SMWD:
Extended message waiting indication denied.
51. SNR:
Stored number redial.
52. SPKA:
Speaker class of service allowed.
53. SPKD:
Speaker class of service denied.
54. SWA:
Station – to – Station call waiting allowed.
55. SWD:
Station – to – Station call waiting denied.
56. TAD:
Time and Date Key.
57. AAA:
Automatic answer back allowed.
(Automatic answer back can be used on M2112, M2317, M2616, M3000 and
SL-1 telephones with hands free capability. A special hardware kit is required for SL-1 sets and companion 4 speaker phones.
Automatic answerback must have-CLS=HFA for M2616 telephones. CLS AAA (or) AAK keys are not allowed for M2317 TNs.
58. AAD:
Automatic answer back denied.
59. ABDA:
Abandoned call record and time to answer allowed.
60. ABDD:
Abandoned call record and time to answer denied.
61. ADD:
Automatic digital display default for M2008, M2216, M2317, M2616, M3000, M3902, M3904 and M3905.
62. DDS:
Delay Display, Display activates after call is answered.
63. IMA:
Integrated messaging service attendant allowed.
64. IMD:
Integrated messaging service attendant denied.
65. ICDA:
Internal call detail recording allowed.
66. ICDD:
Internal call detail recording denied.
67. IPNA:
Intercept position allowed.
68. IPND:
Intercept position denied.
69. IRA:
Incoming ringing line preference allowed.
70. IRD:
Incoming ringing line preference denied.
71. XHA:
Exclusive hold allowed.
72. XHD:
Exclusive hold denied.
73. HSPA:
Hospitality management allowed.
74. HSPD:
Hospitality management denied.
75. NIA:
Incoming non-ringing line preference allowed.
76. NID:
Incoming non-ringing line preference denied.
77. OLA:
Outgoing line preference allowed.
78. OLD:
Outgoing line preference denied.
79. OCBA:
Outgoing call barring allowed.
80. OCBD:
Outgoing call barring denied.
81. VCE:
Voice set.
82. DRG1:
High fast tone, frequency 667 HZ/500 HZ warble rate 10.4 HZ.
83. POA:
Optional privacy allowed.
84. POD:
Optional privacy denied.
85. PRSA:
Priority call pickup allowed.
86. PRSD:
Priority call pickup denied.
87. DSI:
Data service access or IS server TN allowed.
88. DSX:
Data service access or IS server TN denied.
89. VMA:
Server voice message allowed.
90. VMD:
Server voice message denied.
91. CMSA:
Command and status link allowed.
92. CMSD:
Command and status link denied.
93. CNIA:
Call number information allowed.
94. CNID:
Call number information denied.
95. CCSA:
Controlled class of service allowed.
96. CCSD:
Controlled class of service denied.
97. CCOS:
Controlled class of service Key.
98. CDCA:
Conferee Display count allowed.
99. CDCD:
Conferee Display count denied.
100. CNDA:
Call party name display allowed.
101. CNDD:
Call party name display denied.
102. CFTA:
Call forward by call type allowed.
103. CFTD:
Call forward by call type denied.
104. SFA:
Second level forwarding allowed.
105. SFD:
Second level forwarding denied.
106. MRA:
Message Registration allowed.
107. MRD:
Message Registration denied.
108. ADV:
Data port verification allowed.
109. DDV:
Data port Verification denied.
110. CNIA:
Call number identification allowed.
111. CNID:
Call number identification denied.
112. MSIA:
Make set busy improvement allowed.
113. MSID:
Make set busy improvement denied.
114. DAPA:
Display access prefix allowed.
115. DAPD:
Display access prefix denied.
116. BFEA:
Boss secretary filtering enhancement allowed.
117. BFED:
Boss secretary filtering enhancement denied.
118. RCBA:
Recall to boss allowed.
119. RCBD:
Recall to boss denied.
120. ICDA:
Internal call detail recording allowed.
121. ICDD:
Internal call detail recording denied.
122. CDMA:
CDMA allows external station activity records to be generated for the set.
123. CDMD:
CDMD denies external station activity to be generated for the set.
124. MCTA:
Malicious call trace allowed.
125. MCTD:
Malicious call trace denied.
126. CLBA:
Active calling party number and name per-line blocking.
The user may still request CPP by dialing the CPP code.
127. CLBD:
Deactive calling party number and name per-line blocking.
128. AUTU:
Unrestricted Authorization code class of service.
129. AUTD:
Denied Authorization code class of service.
130. AUTR:
Restricted Authorization code class of service.
(When the CLS is changed from AUTR to AUTU or AUTD, all previous telephone authorization code information is removed.)
This class of service is valid only when station specific Authorization codes (SSAU) package 229 is equipped.
131. GPUA:
Group call pickup allowed.
132. GPUD:
Group call pickup denied.
133. DPUA:
DN Pickup allowed.
(DN pickup is not allowed on telephones in group Zero (RNPG=0). Must have directed call pickup (DCP) package 115.
134. DPUD:
DN Pickup denied.
135. DNDA:
Dialed Name Display allowed.
136. DNDD:
Dialed Name Display denied.
137. CFXA:
Call forward to External DN allowed.
138. CFXD:
Call forward to External DN denied.
139. ARHA:
Audible remainder of held call allowed.
140. ARHD:
Audible remainder of held call denied.
141. CLTA:
Network call trace allowed.
142. CLTD:
Network call trace denied.
143. ASCA:
Alarm security allowed.
(Mutually exclusive with three-party service allowed (TSA).
144. ASCD:
Alarm security denied.
145. CPFA:
Forced camp-on from another set allowed.
146. CPFD:
Forced camp-on from another set denied.
147. CPTA:
Forced camp-on to another set allowed.
148. CPTD:
Forced camp-on to another set denied.
149. ABDA:
Abandoned call record and time to answer allowed.
150. ABDD:
Abandoned call record and time to answer denied.
151. CFHA:
Call Forward Hunt override allowed.
152. CFHD:
Call Forward Hunt override denied.
153. FICA:
Forward intercom calls allowed.
154. FICD:
Forward intercom calls denied.
155. NAIA:
No Answer identification allowed.
156. NAID:
No Answer identification denied.
157. NAMA:
Name display on other set allowed.
158. NAMD:
Name display on other set denied.
159. RNGI:
Apply ringing when idle but off hook.
160. RNGB:
Apply ringing when idle but off hook or busy on the other line.
161. AGRA:
Agent Greeting allowed.
162. AGRD:
Agent Greeting denied.
163. AHA:
Automatic Hold allowed.
164. AHD:
Automatic Hold denied.
165. MOAA:
Mute on Answer allowed.
166. MOAD:
Mute on Answer denied.
167. MINA:
Message Interrupt allowed.
168. MIND:
Message Interrupt denied.
169. UDI:
Station is (not) restricted from receiving DID calls.
170. RDI:
Station is restricted from receiving DID calls.
171. RCC:
Restricted form receiving collect calls.
172. DDGA:
DN Display on other set allowed.
173. DDGD:
DN Display on other set denied.
174. PRSA:
Priority call pickup allowed.
175. PRSD:
Priority call pickup denied.
176. NRWA:
Call waiting Night class restriction allowed.
177. NRWD:
Call Waiting Night class restriction denied.
178. NRCA:
Forced camp-on night class restriction allowed.
179. NRCD:
Forced camp-on night class restriction denied.
180. NROA:
Priority override night class restriction allowed.
181. NROD:
Priority override night class restriction denied.
182. DRDA:
Distinctive ringing by directory number allowed.
183. DRDD:
Distinctive ringing by directory number denied.
184. USRA:
User selectable call redirection allowed.
185. USRD:
User selectable call redirection denied.
186. ULAA:
Set based Administration user access allowed.
187. ULAD:
Set based Administration user access denied.
188. RTDA:
Call redirection by time of day allowed.
189. RTDD:
Call redirection by time of day denied.
190. RBDA:
Redirection by day allowed.
191. RBDD:
Redirection by day denied.
192. RBHA:
Redirection by Holiday allowed.
193. RBHD:
Redirection by Holiday denied.
194. PGNA:
Allow PAGENET access.
195. PGND:
Deny PAGENET access.
196. FLXA:
Flexible Voice/Data TN allowed.
197. FLXD:
Flexible Voice/Data TN denied.
198. FTTC:
Flexible Trunk to Trunk Connections Conditional.
199. FTTR:
Flexible Trunk to Trunk connections restricted.
200. FTTU:
Flexible Trunk to Trunk connections Unrestricted.
201. DNDY:
Diversion notification with called party’s number and name when available.
202. DNDN:
Diversion Notification Without called party’s number and name.
203. DNO3:
Diversion Notification option with diverted-to party’s number and name when available.
204. MCBN:
Set linked to a Non-MICB line card.
205. MCBY:
Set linked to a MICB line card.
206. FDSA:
Force disconnect allowed.
207. FDSD:
Force Disconnect denied.
208. NOVA:
Network Override / Break-in allowed.
209. NOVD:
Network Override / Break-in denied.
210. HTYP:
(Hunting Type)
LIN- Linear hunting
RRB- Round Robin Hunting (Prompted when USE=GPHT).
- Thread starter
- #5
look aip your cls marks that end in A, 99 percent that end in a (allow) are the ones that are used.. ndd/tdd/add.. not ending in a, but tdd usually works best.. tandem digit display.. gives me the calling number on line 1 if i am talking in line 0..
35 years on the keyboard and i know the cls marks that i use.. they almost all end in a
pretty standard for a 3904 with mail (fna hta mwa).. i almost never use cfxa (forward external) or sfa.. that one can send calls to mail without a mailbox if used in the wronge place
john poole
bellsouth business
columbia,sc
35 years on the keyboard and i know the cls marks that i use.. they almost all end in a
Code:
FNA HTA TDD HFA MWA CNDA CDCA DAPA GPUA DPUA DNDA CFXA TDDpretty standard for a 3904 with mail (fna hta mwa).. i almost never use cfxa (forward external) or sfa.. that one can send calls to mail without a mailbox if used in the wronge place
john poole
bellsouth business
columbia,sc
- Status
Similar threads
- Locked
- Question
