Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing NCRD on Route

Status
Not open for further replies.
tlrcmc

tlrcmc

IS-IT--Management
Jul 21, 2010
3
0
0
US
Does anyone know how to change the NCRD on a Route to Yes. Route is active and working but not passing Called Number. Route is a QSIG route on Nortel CS1000.

Thanks
 
Sort by date Sort by votes
I believe you have to say YES at ISDN for the Gate Opener
 
Upvote 0 Downvote
KCFLHRC thank you for the reply...I tried that but I get the below.



REQ chg

TYPE rdb

CUST 0

ROUT 51

DES

TKTP

M911P

ESN

CNVT

SAT

RCLS

VTRK NO
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA

IFC ISGF

PNI 00001

CHTY BCH
CTYP
 
Upvote 0 Downvote
That is the Gate Opener, see below. However, with QSIG you may not get that option

ISDN YES
MODE PRA
IFC NI2
CBCR NO
NCOS 0
SBN NO
PNI 00001
NCNA YES
NCRD YES
CHTY BCH
CPFXS YES
CPUB OFF
DAPC NO
BCOT 0
INTC NO
 
Upvote 0 Downvote
Thank you it must be the QSIG like you suggested.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

monkey101
  • Locked
  • Question
RAN route issue with multiple trunks in route
Replies
0
Views
46
monkey101
monkey101
ashwincjoshi
  • Locked
  • Question
Issue with CDP Configuration on Nortel CS1000 - One Number Works, One Doesn't
Replies
1
Views
110
Firebird Scrambler
Firebird Scrambler
Tjets55
  • Locked
  • Question
Expensive Route Warning Tone
Replies
1
Views
43
Firebird Scrambler
Firebird Scrambler
CentralJIM
  • Locked
  • Question
no caller ID on PRI external call
Replies
5
Views
139
CentralJIM
CentralJIM
canijomxli
  • Locked
  • Question
How to remove route member?
Replies
3
Views
70
canijomxli
canijomxli

Part and Inventory Search

Sponsor

Back
Top