CDR no CID on incoming, fine on outgoing.

[802]

Having trouble with getting callerid on cdr records for incoming calls on an option 11c, succession 3, inc is set on cdr in the RDB, anyone have any ideas? it's a pri line, the callerid is appearing on the handset display. Below is whats appearing on the port, outgoing is working just fine.

N 020 00 T000001 445 07/05 15:45 00:01:38
& 0000 0000

 

[johnpoole]

in load 96 enl msgi x on the d channel, that will show the numbers that you are being sent from the co. if your not getting clid, cdr can't collect it

john poole
bellsouth business
columbia,sc

 

[802]

Thats the problem the CID is in there when i check msgi x on the d channels, and all the 164 info and the national/international information.

 

[thefeenix]

As long as you've got CDRE package 151 enabled then check CLID is set to YES in LD17

 

[johnpoole]

what do you have cdr built as?

TYPE CDR_DATA
CUST 00
CDR YES
  IMPH NO
  OMPH NO
  AXID NO
  TRCR NO
  CDPR YES
  ECDR NO
  BDI  YES
  PORT 6
  BCAP YES
CHLN 6
FCAF YES
CHMN 1
FCNC 0

john poole
bellsouth business
columbia,sc

 

[802]

cdr built as follows

TYPE CDR_DATA
CUST 00
CDR YES
IMPH NO
OMPH NO
AXID YES
TRCR YES
CDPR NO
ECDR NO
BDI NO
OTCR NO
PORT 3
CNI DGTS
BCAP NO
CHLN 0
FCAF NO

 

[johnpoole]

CLID is set to YES in LD17, and did you check your pkgs?

john poole
bellsouth business
columbia,sc

 

[802]

Turned out to be a PRI problem, thanks for all the help everyone, thought i was going nuts.

 

[johnpoole]

most of ou beat you to it, welcome to the club. when i lost my mind, i wasn't surprised i couldn't tell the difference, but was a little surprised that no one else noticed..

john poole
bellsouth business
columbia,sc

 

[jjfuertesrico]

John,

I have a similar problem. I have package 151 enabled. MSGI shows incoming CLID, CDR_DATA has CNI as DGTS and RDB has both CDR and INC set to Yes.

Thanks for your help,
Julián.

 

[johnpoole]

there is a cls mark to record incoming msgs for each set for internal records (icda) and there is a prompt is cdr data for incoming call records ld 15 chg cdr imph yes

john poole
bellsouth business
columbia,sc

 

[jjfuertesrico]

John,

I fixed it changing the CLID to Yes under PARM data on LD17. I got this info from another thread.

In any case, thanks a lot.
Julián.