Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

building ami d4 t-1/feature group d? 1

Status
Not open for further replies.

ebtj

Technical User
Dec 12, 2008
78
0
0
anyone have a guid to build a t-1 loop.

 
I dont have a guide but can tell you this:

Define the new loop in LD17
Define the new route in LD16
Define the new trunks in LD14
 
you are welcome, any other questions or help, post them here! I'll check back!
 
can you provide a little more detailed info.

how to print existing pri loops. how to select an available loop to use?

what to do?
ld 17 ?

ld 16 ?

ld 14 ?
 
Print existing T-1's in LD22
REq: PRT
Type: CEQU

There will be two types of T-1's listed with the TRK on top of the PRI loops

What type of pbx do you have? The reason is that an Opt 11 used TMDI or DTI/PRI cards and each card is only for one loop, in the 61's and 81's they use a dual pri card, each card can be two loops.

Then we can help you to determine what loop number to use
 
option 81.

thanks this is my first go at this. almost need a step-by-step assist.

thanks
 
Just a tip, print all the info on a existing T just so you have a reference. Step by step is kind of hard to do because you would have to provide a lot more info. Straight T1 or PRI. Signaling,interface etc,etc...
 
If I actually read the title of the thread I would see what you ask for. I'll pull some FGD info of my switch and post it for you.
 
LD 16 Build the route

TYPE RDB
CUST 00
ROUT 3
DES NEW_T
TKTP FGDT
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP DTI
PTYP DTT
DNIS YES
NDGT 10
WDGT L
DDLY NO
DCDR NO
ICOG ICT
STEP
ACOD 6500003
TARG 01
CLEN 1
BILN NO
OABS
TIMR ICF 384
OGF 384
EOD 13952
DSI 34944
DDL 70
ODT 4096
GRD 896
SFB 3

IENB 5
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
DRNG NO
CDR YES
INC YES
LAST YES
QREC NO
OAL YES
AIA YES
OAN YES
OPD YES
CDRX NO
NATL YES
MUS NO
MR NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0


PAGE 002

FRL 6 0
FRL 7 0
AUTH NO
TTBL 0
OHTD NO
FGNO 000
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR YES
ASID 16
SFNB
USFB
CALB 7 8
NEXT IN LD 17 ADD THE LOOP. YOU'LL HAVE TO USE THE NTP'S
THEN IN LD 14 BUILD THE TRUNKS
REQ:NEW 24
DES NEW_T
TN 122 01
TYPE FGDT
CDEN SD
CUST 0
TRK DTI
PDCA 1
PCML MU
NCOS 6
RTMB 3 1
TGAR 1
SIGL EAM
STRI WNK
SUPN YES
AST NO
IAPG 0
CLS CTD MFR WTA LPR APN THFD
P10 VNL
TKID
AACR NO
DATE NO DATE
It's hard to go farther then that without being there. Good Luck.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top