Bootp problem new IP500

[kswinnen]

Guys,

Installing a new IP500 with no software on it??? (upgrading does not function)

looking at terminal I got this problem:

eceived BOOTP Response (IFace 00): C0.A8.2A.01

ERROR: TFTP Load Aborted (0x00000005)
Erase Main Image Storage Area

OK

ERROR: TFTP Load Aborted (0x00000005)
Erase Main Image Storage Area


So I need to do an "Erase Main Image Storage Area" before I can do a software installation. Any idea?

Thanks!

 

[kwing112000]

does it come up at all? do you have a license card in it?

 

[kswinnen]

Yep, License card is plugged in.

Terminal gives me this:

CPU Board Version is: 0xC0
CPU PLD Version is: 0x17
CPUID: 0x02 Present: 0x0F Present2: 0x02
Using FPGA build 0x0000005E
Programming FPGA ...
FPGA ID 0x01 Version 0x00 Build 0x0000005E
Initialising NAND device.. registering..
Added device: Hynix 64MB NAND (small block) - 0x0000


P13 Loader v1.1 (SDRAM 128 MB)
MPC8248 CPU Revision 0x0C10
Broadcom Switch Mode was 0x05 now 0x06
EthChipRevId: 0x01 EthPhyId: 0x0143BC30
Erase Main Image Storage Area

OK

Received BOOTP Response (IFace 00): C0.A8.2A.01

ERROR: TFTP Load Aborted (0x00000005)
Erase Main Image Storage Area

OK

 

[puregold]

do your at commands as usual

ACE - Avaya Certified Expert
ACI - Avaya Certified Instructor

 

[kswinnen]

I alraidy did the AT command

Found the problem, added a bootp record to the manager and linked it to the ip500.bin file.

Still strange why there was no software installed on the IP500 like the ones I installed before...

Thanks

 

[puregold]

None of the 500's come with operational software. They all come as 4.0.0 which is just the loader.

ACE - Avaya Certified Expert
ACI - Avaya Certified Instructor

 

[intrigrant]

Correct. But if you start the brandnew IP500 out of the box and then start Manager > UpgradeWizard and the verification option is not set then you get a IP500 without firmware because there is no valid BOOTP entry for this unit.
Thats what happened here.

Always open a config from the IP500 before upgrading, then there will always be a valid BOOTP entry for the unit.

NIHIL NOVI SUB SOLE