Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya partner not hanging up

Status
Not open for further replies.

endel2005

IS-IT--Management
Dec 18, 2013
17
US
I have a weird issue I can't figure out. Ext 10 and 11 when answering a line won't hang up / release line. I do not have a problem on any other extension. I can go to another extension pickup any line and hang up. Any idea's?
 
Bad hookswitches? Swap phones with known good units to confirm.

Short on the voice pair? Swap extension numbers with known good location to confirm.
 
I tried with brand new phones, repunched down the pairs. Moved the lines around to see if it was a line issue. Is it possible a programming issue?
 
I would try bringing each phone to the processor and plug them in directly using the factory provided cables just to ultimately rule out an in house cabling issue.

If you program DSS buttons for x10 & x11 at some other extension, do the LEDs stay lit even if the phones are physically unplugged from 10 & 11?

I [love2] "FEATURE 00"
 
I tried with brand new phones, repunched down the pairs. Moved the lines around to see if it was a line issue. Is it possible a programming issue?

OK, known good phones, same issue, not the phone sets

You haven't trouble shot the station wiring. Do as Dex says, plug the phones directly into the control unit.
 
We might be looking at 2 failed ports. Before settling on that, are x10 and x11 assigned to any groups? Can you try to default the processor to see if starting with a clean slate resolves the issue?

I [love2] "FEATURE 00"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top