Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya partner 509 processor. Wh

Status
Not open for further replies.

Adillo303

Technical User
Mar 29, 2010
49
US
Avaya partner 509 processor.

When a call comes in AA Answers caller enters extension number and the call is transferred via direct extension transfer.

The recipient sees "voice messaging system". Instead of the caller ID, which they used to see.

I am looking for what I need to do to get caller ID to display.

Thank you
Andy
 
We set VMS hunt delay to 5 Rings and called in Caller Id is displayed then.

Thank You

Andy
 
The cpu is a 509 and the expansion card which holds the additional lines is a 408 EC

Thank You

Andy
 
First ring cycle will show voice messaging system, and they will hear Ring-Beep, since it's an internal Intercom call at that point

Starting with the 2nd ring, it should show Caller ID and the ring cadence will switch to Ring-Beep-Beep, as it's a Transfer now.

Now do you have the Automated Attendant answering before the 2nd Ring? Because that's when the Caller ID information comes in from the phone company. Maybe that's why they're not seeing it on the phones.
 
Thank you very much.

Makes perfect sense.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top