Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AVAYA IPO 500V2 with ASBCE error No Subscriber Flow Matched

Status
Not open for further replies.

Imran555

Technical User
Aug 4, 2014
90
0
6
SA
Hi Guys
The ASBCE is configured with IPO 500v2 and registration and calls are okay
only issue i see in ASBCE is this repeated messages in incident ,
Message Dropped
Cause No Subscriber Flow Matched
Attached is screen shot for this error.
Message_droped_ycasf0.png


Also subscriber flow
Suscriber_Flow_godc9j.png

and server flow screens shots
Server_Flow_ipbgks.png



Any thought on above.
 
 https://files.engineering.com/getfile.aspx?folder=a01c8e8d-7982-4b7d-bb48-777464b00055&file=Server_Flow.png
This any use?





“Some humans would do anything to see if it was possible to do it.
If you put a large switch in some cave somewhere, with a sign on it saying 'End-of-the-World Switch. PLEASE DO NOT TOUCH'.
The paint wouldn't even have time to dry.”

Terry Pratchet
 
well I follow the guide but still having issue,
No Subscriber Flow Matched
 
You might have your received interfaces round the wrong way.

Here's our Remote Worker flow as ref:
sbc_flow_x4p9ty.png


SBCs are black magic, so good luck [lol]

Cheers,
BFG9K
Avaya IPO/ACCS Technician
Melbourne, Australia
 
Well the Subscriber Flow is similar but issue still ressit
Subsncriber_Flow_h17s2i.png

and i found error on monitor logs as well,
but can not figure out yet,
Traces below,

OPTIONS sip:6xxx@sipdomain.com;transport=tls;subid_ipcs=153447231 SIP/2.0
Via: SIP/2.0/TLS 172.18.80.45:5061;rport;branch=z9hG4bK0d855cff91b039ceb65fa0b7f0524e07
From: <sips:sipdomain.com>;tag=6bf633829599a0ea
To: <sips:6xxx@sipdomain.com;transport=tls;subid_ipcs=153447231>
Call-ID: 23f37d346d1686b5af34720943b1f4ad
CSeq: 1029917701 OPTIONS
Contact: <sips:172.18.80.45:5061;transport=tls>
Max-Forwards: 70
Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,INFO,REFER,NOTIFY,SUBSCRIBE,REGISTER,PUBLISH,UPDATE
Supported: timer,100rel
User-Agent: IP Office 11.1.0.1.0 build 95
Content-Length: 0

13:49:28 1743831312mS SIP Rx: TLS 172.xx.xx.xxx:13022 -> 172.xx.xx.xx:5061
SIP/2.0 403 Forbidden
From: <sips:sipdomain.com>;tag=6bf633829599a0ea
To: <sips:6xxx@sipdomain.com;transport=tls;subid_ipcs=153447231>;tag=zXcVbNmab28bf481
CSeq: 1029917701 OPTIONS
Call-ID: 23f37d346d1686b5af34720943b1f4ad
Via: SIP/2.0/TLS 172.xx.xx.xx:5061;rport;branch=z9hG4bK0d855cff91b039ceb65fa0b7f0524e07
Content-Length: 0
 
Now that I re-read this whole thread, I am realising you are seeing the same errors we are:

sbc_options_error_caa0xe.png


This is actually a known bug in SBC, and can be safely ignored. Apparently they are fixing it in a later release, this is from Avaya Support:

"This issue is about an alarm in SBCE which was caused by IPO sending SIP OPTIONS message to the remote worker user. The alarm has no service impact at all on the SBCE call processing."

You can safely ignore it for the time being.


Cheers,
BFG9K
Avaya IPO/ACCS Technician
Melbourne, Australia
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top