Aura 7.0 on S8300D

[firespyer]

Hello,
I am following the documentation, I loaded Utility through SDM, next step is supposed to be load System Manager which the docs say is required in all 7.0 deployments however System Manger does no fit on a 8300, doesn't have enough ram or vCPU's even with the most minimal option selected.

Has anyone else run into this?

Thank you,

 

[jtc22]

S8300 doesn't have sufficient resources to host System Manager. If you are installing standalone CM7.0 you can use a dummy System Manager IP to satisfy the required field.

 

[firespyer]

Ok, thanks thats what we used.
I am also running into issues installing WebLM, there is a 8300E profile when loading in SDM, but the CPU on the "D" doesn't come close to it.

EDIT: From the weblm 7 docs it seems that only the E is supported, I have to infer that you can only use a 8300D for lsp's then?

 

[firespyer]

I heard back from Avaya, they sent me over some new documentation outlining the issue that I have.

The TLDR version is this:

Note: should customer choose to have a pure Avaya solution (appliance mode), appliance mode requires customer to buy another server that has sufficient capabilities to run System Manager 7, therefore a single S8300D server is insufficient to host a working Communication Manager 7 solution.