Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

algo 3004 door phone 1

Status
Not open for further replies.

jonsjacks

Vendor
Jun 18, 2008
91
CA
I have an older Algo 3004 door phone and can't find the installers manual. I can't remember the wiring connections for the connection to the line port on the analogue port of the CICS.
 
This is not a "Norstar product" as Norstar had their own digital version made by the same company.
Here is all I can see: https://www.manualslib.com/manual/1314435/Algo-3006.html

Posting in the General forum might get you a downloadable version if somebody has since this version is made for other systems.

Since it's a CICS you may want to get a Norstar Door Phone.
-It connects to a digital port
-When you answer the call a softkey "Open" will appear.
-You can tell it what DN or HG to ring, get special page chimes and ring counts.
 
Last edited:
This is not a "Norstar product" as Norstar had their own digital version made by the same company.
Here is all I can see: https://www.manualslib.com/manual/1314435/Algo-3006.html

Posting in the General forum might get you a downloadable version if somebody has since this version is made for other systems.

Since it's a CICS you may want to get a Norstar Door Phone.
-It connects to a digital port
-When you answer the call a softkey "Open" will appear.
-You can tell it what DN or HG to ring, get special page chimes and ring counts.
Thanks curlycord, I used to have it connected to my CICS but for the life of me I couldn't find the manual for the connections. This was a GREAT help!! Thanks again
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top