This seems to be easy enough to do, but is there any detail instructions on adding a second MXE Processor to a 3300MXE II? I've done everything in the tech handbook but the system doesn't seem to recognize the second processor(I know it's good as i used it as a replacement for the first one as a test).
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Adding a Second MXE Processor 1
- Thread starter Kcissem
- Start date
-
1
- #2
The second processor is connected into the E2T slot of the MXE. When this is powered up, you will need to configure the E2T settings on the card, via port 2007.
Review the information on page 275 of the Tech Book 4.1
__________________________
There is no 'I' in 'Team'
__________________________
Review the information on page 275 of the Tech Book 4.1
__________________________
There is no 'I' in 'Team'
__________________________
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
