7 to 4 digit dialing 1

[Devanam]

Hi all,

I seem to be having some number conversion issues with my MD110. Currently my service provider is sending me all 7 digits and I wish to truncate the first three digits in order to access the 4 digit internal dialing I have set up. The issue seems to be that no matter what paramiters I change on the NUTRI command, the MD110 will not truncate those digits. I've even tried truncating 4 and prepending 1. Nothing will work. Can someone please help me?

Thank you in advance.

 

[whosrdaddy]

let's say your provider sends you 123xxxx (xxxx is the extension nr) in unknown number type

that would be :

nutri:entry=123,cnvtyp=0,numtyp=0,trc=3;

if this doesn't work, ask what TON (type of number) your provider is using. (it could be national, in this case use numtyp=2)

Cheers,
Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Devanam]

I have attempted that. Infact, I've tried all the NUMTYPs on all the CRVTYPs. None of them are working. Is there a possibility that it could be the way the trunk group is set up on my service provider's side?

By the way, thank you for the speedy response.

 

[whosrdaddy]

number conversion on the route has to be activated, check
last digit of serv in ROCAP:ROU=x; (must be 1)

I suppose the route you're talking about is ISDN, right?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Devanam]

Thanks man! That was the issue. Guess I'll never overlook that again, you have no idea how long it took me before I even thought to post on here.

 

[whosrdaddy]

np that's why we're here for...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!