I have Ip office 500 V1 at multiple sights with all voicemail handled at Main sight. (centralized VM). The licence for the 500 V1 at the remote location has standard to professional licence, I take it for the advanced networking feature, and also has a network licence for 4 channels of H323 to tie locations together. Also has VCM card for hardware. I want to put in another location with an 500 V2, What licence do I need? Hardware? Thanks in advanced.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
500 V2 licence
- Thread starter itsmyjob
- Start date
What software versions are your current ip500's on?
The ip500v2 can must run 6.0 or higher.
Within a SCN you can run 1 major release lower.
But you need a voice networking license to start with.
The standard to professional license is not needed anymore from 5.0 and higher.
VCM is always needed in a SCN.
BAZINGA!
I'm not insane, my mother had me tested!
The ip500v2 can must run 6.0 or higher.
Within a SCN you can run 1 major release lower.
But you need a voice networking license to start with.
The standard to professional license is not needed anymore from 5.0 and higher.
VCM is always needed in a SCN.
BAZINGA!
I'm not insane, my mother had me tested!
- Status
Similar threads
- Locked
- Question