3300 upgrade RAM requirements

[fonejack]

I would like to upgrade my old MX3300 from current software version of 7.1 to latest version 10.0 to take advantage of the new features. I see in the release notes the system controller RAM needs to be at 512. Since I am only at 256 is my current controller upgradeable or do I need a completely new controller/ chassis? Thanks in advance

 

[Brookster36]

You can buy the correct RAM from mitel. part number 50005883: 3300 512MB RAM MODULE
when you open the controller it is just on the top. power down, replace and power up.
Thanks
Brooke

 

[kwbMitel]

I doubt it.

Be nice and tell us the controller type will ya?

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[james1982]

if as you state its an mx no you cant - you need to upgrade the controller. lx's, cx and cxi's are upgradeable.

 

[IrwinMFletcher]

Agreed. Even if the RAM was upgradeable, the processor isn't.

 

[LoopyLou]

Only MXe, CX/CXi are upgradable and some late LX controllers came with 512 installed so they will work. MX you are out of luck.