3300 MXE III MCD ver 6.0 sp3

[sadic]

Hello guys,

I have a problem with the password of the system, nobody knows what is the actual password, I tried the default password but i cannot get thru in system, so anybody can help me what is the procedure how to set the password to the default.

Your reply is really appreciated.


sadic

 

[techymitel]

Serial cable into the RS232 port in the front using 9600 8N1

If you know the username use this command:

ResetLoginPassword "username" [RETURN]

Or use:

ResetAllLoginPasswords [RETURN]

Will reset passwords to 'password'

 

[sadic]

Hi Techymitel,

Thank you very much for kind reply but do i need another software to use the com1 port of my PC computer to used RS-232 for resetting all password of the system?

Again thank you...

sadic

 

[Billz66]

use a straight db9 male to DB9 female and putty in serial mode 9600 N81

If I never did anything I'd never done before , I'd never do anything.....

 

[sadic]

Thank you for reply Billz, i'll do this to change the password.

Again thank you for both of you.

sadic