Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3300 MXE III MCD ver 6.0 sp3

Status
Not open for further replies.

sadic

Technical User
Nov 15, 2007
23
PH
Hello guys,

I have a problem with the password of the system, nobody knows what is the actual password, I tried the default password but i cannot get thru in system, so anybody can help me what is the procedure how to set the password to the default.

Your reply is really appreciated.


sadic
 


Serial cable into the RS232 port in the front using 9600 8N1

If you know the username use this command:

ResetLoginPassword "username" [RETURN]

Or use:

ResetAllLoginPasswords [RETURN]

Will reset passwords to 'password'
 
Hi Techymitel,

Thank you very much for kind reply but do i need another software to use the com1 port of my PC computer to used RS-232 for resetting all password of the system?

Again thank you...

sadic
 
use a straight db9 male to DB9 female and putty in serial mode 9600 N81

If I never did anything I'd never done before , I'd never do anything.....

 
Thank you for reply Billz, i'll do this to change the password.

Again thank you for both of you.

sadic
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top