Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

200icp cx 3.1.0.11 network w a 3300ICP mxe

Status
Not open for further replies.
MitelExpert

MitelExpert

IS-IT--Management
Sep 30, 2010
31
0
0
US
Its been so long since Ive worked on a 200ICP. Can I network (VIA IP TRUNKS) a 200ICP that is at 3.0.1.11 to a new 3300ICP MXe? Or do I need to upgrade the 200ICP? Thanks
 
Sort by date Sort by votes
No problem

**********************************************
What's most important is that you realise ... There is no spoon.
 
Upvote 0 Downvote
SX200ICP does support IP trunks used to connect 3300's. It doesn't support SIP either.

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
 
Upvote 0 Downvote
As long as you have the networking option enabled on the 200ICP it works just fine. Of course upgrading is usually a good idea especially if you run into a snag and need to contact Mitel TS.

"The only problem with common sense is that it's not that common
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

caknfd
  • Question
200ICP PMS
Replies
5
Views
246
Cody2020
Cody2020
Crowtalks
  • Locked
  • Question
MiVB 9.0 MXE III raid question
Replies
2
Views
135
Crowtalks
Crowtalks
zodiacgam
  • Locked
  • Question
Hello, I need help with my 3300 MXe
Replies
2
Views
76
MarvinJK
MarvinJK
RossBC
  • Locked
  • Question
install 200 software on a 3300 CX-II?
Replies
2
Views
72
RossBC
RossBC
Crowtalks
  • Locked
  • Question
MIVB MXE III migration scenario
Replies
2
Views
65
Crowtalks
Crowtalks

Part and Inventory Search

Sponsor

Back
Top