Search results for query: *

IS THERE ANY WAY THE END USER CAN PROGRAM A PAUSE ON THE ADL KEY ON THE i2004?

I DON'T UNDERSTAND, PROGRAM WHAT KEY?

HOW DO YOU PUT A PAUSE ON AN AUTODIAL NUMBER ON A I 2004 PHONE OR I2050 PHONE, THERE IS NO SOFT KEY FOR IT.

Can I do a bcm backup to a vpn laptop, If so, how do i set up the laptop?

I"m sorry, I need to know how to transfer a call from a telephone to the voice mail box of another extension

How do you transfer a call directly into a call pilot mini mail box?

Were you sharing the bus the analog trunk module is on with anything else? Remember a 16 port dtm uses half the resources of a bus and an 32 port dtm uses the entire bus. You should try to use the bus right after your last dtm for this one.

The polycom is set up with 2 pri cards in it, i just don't know how to share the same circuit.

Yes I have the correct setting and have music playing on the mini rca jack.

What do I have to do to share a pri on my succession 3.0 and a polycom mgc 50. I want to be able to use the pri for 2 way voice traffic and forward it to the polycom for video conferencing.

I have a bcm with 3.7 that the moh from an external player does not work. All setting are right and bcm amp plays just fine, any ideas?

How do you de-register a soft-phone? Is there a way to set up auto tn assignment for a soft phone or a i2004 phone.

The rad answers and tries to hand shke then says rad not responding.

Not yet, still looking

do you have the 12x0 plugged in the top slot on the 6 port fiber, and did you do the upgrade on the mics to 7.1? If you did, did you take it to 6.1 first?

Tried it from direct connect and it worked every time. It does not work operator assisted at times either.

In the end user client setup.

Thanks for your help.

Is there anyway for the voice messages to come into Outlook as .wav files instead of the proprietary .vbk files that Call Pilot imports them as? or is there a product that will auto convert

I have a mics with a partial pri. when I dial into the rad, sometimes it does not connect. It does a handshake and says rad not connected. I have swapped rads and ports. I was told there might be a problem with it being a partial pri. Any ideas?