Search results for query: *

Yeah it looks like the modules are dead. Does anyone know of a good place to buty refurb modules?

OK I checked the power cord and it is giving power. I hooked up both 206 and both show no lights. I assume they are toast now. If I get new/refurbished ones should I replace the processor module? If I get new 206's should I upgrade the processor module? Thanks for the help.

The only thing I get is a slight click when I apply power. Both modules do not have a green light. Anyway to determine which module is bad? 206 module and processor module R2.0 Does anyone know where I can get these repaired or buy refurbised? Thanks in advance

I have 3 non system phones one of which an answering machive. None of them are ringing. Assuming the setup is correct (no delayed/no ring) could the wiring affect if the devices ring? Partner Plus II

No I have not checked but I will and see what I find. Thanks for the help.

Actually I have tried swithcing phones and when I do the problem clears up. The problem phone is a Lucent model and the good phone is an old ATT model. DO the circuit boards ever go bad or are the any fixes/adjustments for them? I suspect it is that as I have tried different handsets with no...

Yes I have. It was alittle better but still lower volume then the other phones.

Anyone have any ideas on why a MLS 12D would have low volume and some line indicators would light up? Tried moving to other port and also replaced the flex circuit but still same problem. All other phones working fine. Thanks for any help

What is the flex circuit?

I don't have any outside lines connected as of yet. I am testing the unit. When it rings its a continuous ring, not the ring pause ring pause of a normal ringing line.

I hav a Partner Plus R2 and have extensions that for some reason start to ring non stop. It is as if they are possesed. Do you think it is the processor unit, the 206 units, or the extensions? DO I need to repleace any of the units?

Thanks. Much appreciated.

Are backplanes specific to processor releases? I have an R2 processor and was thiniking of upgrading. Is this possible?