Search results for query: *

You will need to upgrade to version 3. I prefer 3.0(69) OTHERS may differ. I would re-write config. Especially as the port numbers will be out. so a config swap will really upset things. Dont forget VM upgrade to and any sw like phone managers/consoles/ccc etc. 3.1 is also around but our techs...

Have they actually got the TFTP file to make them Avaya branded? There is a coding which is 9 or 11 cant remember whats its over. If its 9 try 11 and if its 11 try 9. Manager is not a suitable tftp server to get these phones running...

Is this commisioning or on a live site.

Wouldnt worry about Incoming call route. You may need that for a new user. Im a great believer in keeping tabs on stuff removed so I would just renumber the extension he/she had for example if 241 make it 1241 or similar. That way you can keep a tab on whats there. In regards to the extension...

On both software levels with 54** series phones there is an extremly poor speech quality/feedback with transferred calls. Lines are ISDN. Have tried AGC on and off. Any other programs im missing here?

If i read your post correctly this is a part of DECT, that it completes its current ring cycle even if answered on another handset

You cannot use internal group ringing on a DK280. You may find the phones that ring is an external call via a DDI/Analogue line which you can select more than one port to ring.

It has messaging on it but not autlook .and sorry my typing is poor. It is Windows CE. I just want the ability to use a custom form

I have to record mileage, start times/finish times and job numbers each day. Have designed an OUTLOOK form. Can this now be used on my PDA? Windows Pocket POC 2003

Has any body the link on the above document. Been trying to find it on the support site all morning to no avail.

Have you tried under the menu option turning off ACS? Mode. There are three options the mode above could be very wrong. Trying this from memory.

The one down full would be the user having to dial 30 shortcodes to put the groups into night.

So what would be the way to manually control night service. Without using time profiles.

HGNS+ Has been used with no group number/name

Our office manager is a member of around 20 Hunt Groups but not enabled. On her phone a 5420 she has a HGNS+ Button. If this is pressed the IPO Freezes and reboots. We have has this problem for a little while and have upgraded from 3.0 (44) - 3.1 This made matter worse so I rewrote the entire...

Also just check you network admin is not stopping the World Wide Web Publishing service on startup. If its not running then just start it.

May I point you to this. Is a do and dont guide to upgrading sw. http://support.avaya.com/elmodocs2/ip_office/tech/Global_IP_Office_Technical_Bulletin_Number_54.pdf

Are you checking the dial in box? If your doing it locally just change the ip address to the ctx's range. If your not sure go into programming. HOLD *#*#1*2*3 Password 0000 Program 916 Feature key 1.

Would their be any reason I cannot break into the DISA AA options on the 2 channel message card. Have set incoming queing and then a Digit 1 input to transfer to SVM card. But will not follow DTMF commands. DISA security is set to trunk. Any ideads.

I have had the honour of 2 installs of this system and neither of the sites have been using listed access points. I would say the only way would be to try. However is very frsutrating when you are after Tech support and the response is "So which listed AP are you using" Must say to be honest...