Search results for query: *

Use RAD, NRU on a PC, then program your NVM from the set emulation program.

cinphony reports and Infocus will give you all what you need.

If you are the system admin you should know the passwords, don't expect anyone in this forum to give out the passwords that will enable people to spy on other people phone calls

just power down, take out non-needed equipment and install new equipment, power up and start programming.

try search google

thanks for the info senk1s

Hi all, I received a used stand alone ACD NAM that is missing the security key on the parallel port. I called Cintech and the reply I got from them (there is no way to replace the security key) this means that the ACD is useless!:( is this true? what kind of logic is this?! Is there a way to...

Looks like you have a major problem; do you have ACD on the NAM? if yes then it might be the co-residency problem. or It may have defaulted, In this case you must treat it like a new system. Press F903 to select a feature code range. Then press F983 and enter the password 266344 Good luck.

it is all in the dialer setup, if the norstar work fine without the dialer then you should follow the dialer documents to set it up, there are many kinds of dialers and each one has its own setup.

thanks for the replies, skip555, can you provide a link to this product? I can't find it with google.

anyone knows a fax detection box that will pass the CLID to the phone system? I want the fax to pick up only when a fax is coming in and system to pick up calls, and I need the CLID that’s why I can’t set the line to go to the fax first. Any help will be appreciated.

any one knows a fax detection box that will pass the CLID?

Thanks for the reply NTL555, but will the fax detection box pass the CLID info to the system? I know the StarTalk C is NOT compatible with the system but it works and it has been working well for years.

I was trying to set up a fax to the CICS 4.0 with an old startalk C . I want the fax to pick up only when a fax is coming in and VM to pick up calls. I cant seem to get it to work, and was wondering what the easiest way to do it. I need the CLID that’s why I can’t set the line to go to the...

you didn't answer senk1s, how are u trying to access the mailbox?

I don't know about 3x8 but in most systems if you go to Maintenance you will find SP#

using the Old DN/New DN is not a good idea, it will change the default port/dn config, if something goes wrong with the system everything will be messed up and you will spend hours trying to figure out the old setup (unless you have a very small system) , x-connect is the best way to move users...

f973 worked!! thanks senk1s

f**xftest show f915 inactive, no f916,917,...

In this NAM I cant get to the password prompt, Tried from F915 to F949. NAM 4.1 with ACD any ideas?