Search results for query: *

I am working on a 2000 IPS that had a AD-8 Voicemail go bad. I replaced the VM with one that I had to get from a third party. The trouble is that the softkeys are not present on the phones when in VM. I talked to another tech and was told that some of the earlier VMs did not have the softkeys on...

You might try to reformat the VM disk (flash) and reload the prompts using the In-mail utility tool.

After re-load of software...changed to default subnet.192.168.1.x. Still didn't work.

nytalkin - seen that also, was one of the first thing I checked. rado40 - reloaded software on different flash card. same results.

No Idea, Another market sent the system out to a off-site facility and they couldn't get it to work...so we replaced the system and they sent this back...It could have been bad to begin with or someone made it bad...Too many parties involved to determine.

Thank you.... Also. There was NO DSP card attached..

Looking at that ...how did you determine it? For future reference. Also, DSP Card attached...so must be Motherboard.

Here it is Starting at 0x10000... Last reset cause was (0x13) CHECK_STOP_RESET VxWorks Copyright 1984-2002 Wind River Systems, Inc. CPU: Mitel Embedded PPC82XX F64 Runtime Name: VxWorks Runtime Version: 5.5.1 BSP version: 2.1/1 Created: May 7...

Here they are boot device : ata=auto0 processor number : 0 host name : file name : /partition1/Kts8250.vx inet on ethernet (e) : 192.168.22.2 inet on backplane (b): host inet (h) : 192.168.17.31 gateway inet (g) : 192.168.17.1 user (u) ...

I have a SX-200 CXi that will not stop booting itself..is there a way to stop the startup process?

Yes...

What is the difference in a IPLA Pad A, B, and C cards.

I did check for Mode A or B and no programming is in place. 6529 set to 0..2 modes. PBX placed in night mode thru Recp phone night button F1301. I also just remove the code for night mode change "68". I guess to make sure someone doesn't put it into night mode by accident. other than that I have...

This is a weird one. This is a 2000 IVS2. The problem is the night mode. I have it programmed to ring 14 phones using TAS when the system is in night mode. The problem is that every once in a while the phones will not ring when in the system is in night mode. NOTE: It seems to be happening on...

Well, I tried it and followed the script and 15 mins later it hung up again.....Anything other ideas????

Thank you... I will try that...

It's not new, new...after market(I know...I know). warranty is for DOA only..It lasted for about 2-3 weeks then...BOOM. Problems started...

I have a 2000IVS with a NEW AD-8 VM attached. Problem I have is that the VM starts this error routine randomly and locks up the system. The message is that "I don't have enough memory to run Defrag"???? and then it tries to replace some files and the system won't let it. It worked for about a...

I have a Option 11c Succession 3.0 and a Centigram 6.1B VM...I have the SL1 integration on the VM. I have 4- 2616's with MCA attached to the detection ports on the centigram. I have 4 analog ports into the VM and all the TN's (Dig and analog) in the same RNG (10). I have Pick-UP AND DN Pick-up...

But, my question was...How do I tell the switch that this 911 call came from this tenent(1-50) in this building (A-D) and to route out this set of trks.