Search results for query: *

dwailin, Will i need to use the phone keypad or will the dictaphone keypad work.

just type in the 5 or 6 digits you want

I found that the only way to get it to work is to hit 9 then the call button or 9 1 for longdistance

Is there a device that I can connect to my voip phone that I can connect analog devices to. I have a 4620 ip phone and would like to connect a dictaphone up to it.

Never mind it is change telecomute.

Ok I know somewhere I programmed a number to activate ec500 from an outside line.. Now I cant remember what field that was. I thought it was remote something but now I know that is not it. My guys can call from an outside line hit the feature code and activate or deactivate ec500. WHAT IS...

ok I think I am starting to understand. So if the original text is like this ## Telephone dial plan length (the length of an internal extension number). ## Default is 5. The range is 3 through 10, inclusive. ## For example, if your extension is 12345, your dial plan ## length is 5. ##...

Ok so everything in that file goes to the root directory correct. Do I also add this file in the root directory 46xxsettings.txt and what if do I need to make any changes to this file?

Thanks, My problem is that i download 46xxH323_040706.exe but which file do I use to place in the tftp server to download?

does anyone have the the instructions to download firmware for the 46xx phones from avaya, then make changes to place on a tftp server

You can use 4610 just alias it as a 4620 works fine

Never mind I found it in the crisis alert form.

Thanks that worked. Now I need to find where the programming for this is. This is what came up any Ideas? EXTENSION TYPE COR/ Cv1/ Ext Type Name COS...

I have an extension that I am trying to find out what it is being used for. I do a list usa ext and it says no data in pbx. I do a display stat xxxx and it says that it is assigned but used as something else. It is not a data port, how can i find out what it is being used for?

Has anyone ever set up a tie line with a Rockwell and Avaya pbx. If you have could you let me know how you have provisioned the Rockwell ds1 card. If it is different than a normal ds1 in an avaya could you let me know the avaya settings as well. Thanks,

Oh and make sure you are liscensed for both VAL boards.

Check and make sure you can ping the address from another board. Check to make sure the cables are connected to the board. Doesnt matter what firmware you have, as long as you have ip connectivity you should be able to reach that board.

Yes, and you can always filter the errors by error type by just typing 513 in the type field.

Unable to make or receive. Do i need to add a station in the pbx so that when a call comes in that it will pick it up. change route-pattern 100 Page 1 of 3 SPE A Pattern Number: 100 Grp. FRL NPA Pfx Hop Toll No. Inserted...

Guess I dont understand your question. I have the lineside installed. The trunks go into service ok. I am unable to make a call out. I dont know if I need to assign a number in the pbx to go with the DID i assigned in the polycom unit. I have assigned routes in the udp table to route the...