Search results for query: *

Thanks for the info. Oddly the problem only occurs if the system is turned off. Next time it happens I'll grab an alarm log and call BT to fix it.

The terminator unit is an NTE52B like this It hooks up to the BCM via an RJ45 on the NTE52, so I think it is Euro ISDN trunk. We've never had on coax/DASS2. Where would I check/change the clocking?

At an office I support I have a BCM400 hooked up to a BT supplied ISDN30 copper line via the usual on the wall terminator unit. The problem is that since a lightning strike (replacement termniator unit needed) and an upgrade from V3 to V4 (and subsequent ground-up re-entry of config) the...

Thanks for the info. The line is from an internal phone system (nortel BCM) and should be just basic ISDN BRI (128k).

I have a BCM 400 that I want to run ISDN extensions from. The problem is we don't have Cat5 running from the BCM to where we want the ISDN to terminate. We do however have a 20 pair phone cable running there with spare pairs. Can someone please tell me what pins need to be connected on a voice...

I have a BCM 400 that I want to run ISDN/S-loop extensions from. The problem is we don't have Cat5 running from the BCM to where we want the ISDN to terminate. We do however have a 20 pair phone cable running there with spare pairs. Can someone please tell me what pins need to be connected on a...

I have another module inserted for hooking up to the incoming ISDN30. What equipment will I need to get to hook up ISDN extensions?

Our BCM 400 has an ISDN BRI S/T card in a front media bay with 4 sockets on it 1: Am I right in thinking this card will allow me to install internal ISDN extensions? 2: If so, how far can I run these on my internal wiring? And how many pairs will I need? 3: How do I config the BCM 400 to...

We had the same issue with a Server 2003 x64 box after a java update. We removed Java and reinstalled J2SE Runtine Environment 5 upadte 16 (and the development kit, but I'm not sure if you need that) and it worked fine.

The incoming line's an ISDN30 (I think) and it terminates in an NTE2D like this: I don't think I have a suitable handset to connect directly to that kind of line (There's an old as heck ISDN videophone somewhere in the office but would that work?)

Here's the line info I got line 61 incoming <start time> user 268 <username> state connected duration- number and name ?-?DNIS: 652168

I have a BCM 400 (software version 4.0.2.03a) that does not display any incoming CLID information to the handsets. As far as I can see all settings are configured correctly. The real questions are: 1: How do I check my telco (BT) are sending CLID to my BCM? and 2: What settings do I need to...

I have a database wich uses option groups extensively on forms. All my option groups are bound to fields in a table, and thus fill these fields with numbers, I need the report to display text in place of the numbers. The storage as numbers in the table is fine, I just need to know how to show...