Search results for query: *

Sounds really strange. I can only suggest a few items in my opinion. If this server is testable get an old switch 3com etc or even better a hub and put the PC with both nics into this box and then your pc to and see if the pings still fail. If this is the case then you know first and foremost...

IBM... For you sanity. If every time you ping the device it comes back reqest timed out and sometimes connects you could have a traffic related problem or the AS400 network card could be configured wrongly its not comming back to me but I had a similar problem with a 3745 and its because the...

Layer 3 means that the network will no longer be nice and flat like it was before ie 1 dhcp server the same subnet accross the board netbeui in use DLC worked all over. Now when you get your person in hopefully they will ask you all the right questions on what protocols are running on you 650...

Can we have some more info please .. A is the site that holds the DHCP Server.. and is connected via a hub/switch to B? If so DHCP works fine like you say above. C runs two devices that allow you to bridge a connection between a and c. These two devices seem to work fine. Please provide...

True.. Collision domains though are layer one devices ie repeaters hubs that basically copy data to each port therefore if you have a 16port hub you have one collison domain. Now if your network is entirely hubbed then you can get into trouble very quicky after the 5/6th hub you add because...

The way most of us do it nowadys is by installing Fibre between the links ie shipping back to computer room. I would recommend that you strongly advise against any half way house solution besides the cost isnt that dear and its a one off cost for the whole building if done right. Most cablers...

Hi sounds like you got a bit of a git here. I reckon your back to taking a look at your setup run task manager and see if the server is running a high percentage when the misterious pc logs on and kills the rest. Is everything on one server ie logons exchange dns wins etc then you may find...

Sounds to me more like config. If the CDROM finds it booting from a disk is this disk booting up with its own config is Device=x:\xxx\xxx.sys and in auto mscdex /d:xxxxx x's being the driver or are these actually on your C:\ someone stated that it sees it in dos but this is from a floppy and...

Hello Chaps. I thought that once you had a CCNP you only had to take CID to get a CCDP and like wise if you have a CCDP you only need to take CIT to top it up and that and associate level qual was the start to the first main qual I may be mistaken though. I actually took the NA then the DA...

Hello, I seem to remember from back on the Switching course we used a straight through patch cable as the standard roll over cable didnt work but it works for all other swithes. Try a standard patch lead into the console port and if ive remembered right all the rest should be ok 9600 8 1 no and...

One is CATOS the other is IOS CATOS tends to lend itself to the higher end switches whereas IOS to the routers although the 29xx and the 35xx 19xx etc run IOS they are both easy enough to get on with.

Im lost a little but I think I get it you want a remote site to join your network I would have thought you would have just had to set up the ISDN and the token ring to be in the same ring group and bridge group and the same on the other side. DLSW would be used if you were doing it properly ie...

Its still beating away mission critical systems all over although I think its fair to say its generally finding the bin instead of reinvestment and gigabit ethernet is running for the goal.

Hello, The CID 3.0 was the worst exam I ever took in my life I failed it once by one mark the best advice I can give you is try and get hold of a set of course notes if I remember rightly SNA was in there ISDN was there Cisco Hieracy was there to it was in essence an easy course but the exam is...

http://www.cisco.com/univercd/cc/td/doc/cisintwk/dsgngde/snafr/fr_ch2.htm I think this is what you will need..

I would personally promote the current BDC to the PDC first and make sure all the scripts etc that run are copied to the appropriate areas is you are using replication. Once the domain is stable and your happy the PDC is happily running away do an outage and switch off the old PDC which should...

Hello Sirs, Right you have an Ethernet side and a token ring side I assume. You have a AS400 and you want to get traffic over to the Ethernet side? From what I read It looks like you only need to get to the Dell server? Is this correct? If so what protocol do you use? IP SNA? If its IP...

From what ive read there is no routing capabilities on the box mate so it wont work. I think I get what your trying to do I think and i maybe wrong, you can get an intel card that allows you to selectively allow certain nodes only this or get two routers, get rid of the bridges and bang in an...

I thought that the PCMCIA card design for the flash cards in the CAT was only to be used on the CAT itself I dont think you can plug it into a laptops PCCARD interface but I maybe wrong. If you get one PCCARD though and one CAT6xxx then you could make the flashcard first off with a standard...

The only thing I could recommend is to move the spooler file of the C:\ and to another area. Maybe the server is really busy and the page file is hogging C:\ try running performance monitor on the box and see where its struggling