Search results for query: *

Take the set to the mdf and punch it down right off the sta port-pull existing jumper.

Change your routing to 9any route to pri absorb 1,and tell your customers to GET OVER IT.

I think you can with a regular t1 and put hands free-no int keys-1.

You should be abel to use f982 ans lines yes at 5pm and then 4 rings to aa,and f982 ans no at 8am turn drt off and have ring forever,but no way to do it with a timer. They would have to do this manually twice a day ,kind of a pain..

Ok argon,but does that show any activitie on that chanel and act as a ringing line appearance? I guess I should try it.

Hey thanks alot guys,that must of been how it was setup,then I can change the line name from l165 to the main phone #. Excellent...

Does anyone know of a way to put channel/lines appearances on a set using pri?They apparantly had it set up this way before,I had to manually reprogram the entire system this weekend because of a corrupted software upgrade that was done without a backup,got everything working but cant find a way...

Make sure under f982 that you have answer line set to yes,and under f983/lines tell it to answer the did trunks after say 8 rings,make sure your controll set for that line is the recept.

Check your target lines,prime sets and try turning off drt to prime,if that dont do it it sounds like some software corruption and you may indeed need to do the old **STARTUP,clear the data and start over.A back up will do you no good if your backing up corrupted software,also make sure that the...

You should have left set relocation on and let all the phones come up(preferably pluging in one set at a time),when you turned set relocation off during system reboot-those stations that had not auto relocated came up as default ext numbers based on port,evan though you went back and changed the...

arr, where do i get info on the norstar voip gateway-I thought it was for bcm only,does it work with mics?

look at you recieved digits and target lines,make sure the prime set for each target line is the ext. that it should ring at.

do you have a goverment job?Sounds like you have a littel to much spare time on your hands....

check your fiber cabel and or replace it if you have one.

Get a m7324 and be done with it,they dont cost much any more.

9*1 review call pilot feature codes prior to init.

O.k.,great ill look into that,do you know if 6 trunk mods are the system limitation?I think it is because that would bring you up to line 144-for copper. Thanks again.......

Ok..How do I know if I have xc software and if I use a six and a two port card wich one goes where?And is my limit 6 trunk moduals? thanx again....

Ok correct me if im wrong,I got a mics 3.o with one 6 port expansion-fiber-card,the second expansion card has to be a 6 port right?A 2 port wont work right?also I have 5 trunk moduals,they can only add one more right? thanx.......

Thanx Arr dude!