Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. kayeth

    Need Info on how to stop a hack Ip scanning NT/authority Smart PPl PLZ

    1. While the system is shut down, disconnect any network (local network, cable modem, DSL, broadband, etc.) from the back of the system. 2. Turn on the system. If using a dial-up (i.e., modem) connection, do not connect to the Internet. 3. Click the Start button, and then click Run. 4. In the...
  2. kayeth

    how to check connection

    could you just post your IP add, subnet mask, default gateway and DNS servers. you can get those by ipconfig/all. if your IP is an invalid one, you do the power cycle. power down your modem first (unplug the power cable from the outlet) then shut down your PC. then wait for about 1-3 minutes...
  3. kayeth

    how to check connection

    could you please describe how you connect your PC on your network; example, are you using an external modem, router, or hub/switch?
  4. kayeth

    Networking 2000 & XP giving me grief

    try to visit www.wown.com regarding your problem...this is a very helpful website with regards to file and printer sharing....
  5. kayeth

    Can't get IP Adress with DHCP Enabled

    oh, and you were able to get a valid IP add, connect your PC on any of the numbered ports on your router...then your cable modem on the wan port...make sure that the lights are lit...then try to check again your IP add...it should be in the range of your routers IP which is 192.168.1.xxx...then...
  6. kayeth

    Can't get IP Adress with DHCP Enabled

    hi...i just would like to confirm if you've already checked your LAN card under the device manager...is it properly installed? if under the device manager, it appears to have an exclamation mark...try to uninstall and reinstall your card first or update the driver... then go back to the device...
  7. kayeth

    Can't get IP Adress with DHCP Enabled

    one thing more, aside from the IP add, try to know also the subnet mask, the default gateway, and the DNS servers...good day!!!
  8. kayeth

    Can't get IP Adress with DHCP Enabled

    by the way, may i know what modem are you using? and also, can you please try to verify the IP add with your ISP. cause sometimes, there are some ISPs that would like the IP add configured manually...have a copy of that and you can assign that IP add first on you PC(connection is directly to...
  9. kayeth

    Networking problem with LAN

    have you already enabled file sharing on all the PCs connected to your network? if not, try to go to www.wown.com and this site will help you a lot regarding file sharing...good day!!!

Part and Inventory Search

Back
Top