You might try disconnecting it from power and or POE cable.
Plug it in, as soon as any lamps come on, rake your finger across the softkeys from left to right?
I really know little about the I2003 ( it may not even have any softkeys, but know this works on some other Nortel IP sets.
Good luck.
Thank you for your help.
There are actually several steps involved with adding ISM licenses. I made it through sweating it out.
You all get a vote/star from me.
Have a great day.
Harry
I need to add eight digital ISM licenses to a Option 11c.
I have the key-codes from the vendor but need assurance I am not going to screw up the system while trying to add them. Does anyone know the steps?
The PBX is release 4.
Any insight is appreciated.
I am attempting to build a PRI on an Option 11 release 4 using a TMDI card. I am using loop 29 in the second expansion cabinet. I used a dch 29 to match the loop. It appears the system has 64 total TMDI d-channels, so I figured that was okay. I have built the trunks, route, DLOP, DCH and wonder...
I have a Opt.11C with an existing TMDI card in it and need to add another for a PRI.
It seems that when at RLS 4 or higher, you can add trunks without purchasing a license from Nortel.
Is this true?
I think I just need to buy a DTI with down-loadable D-channel daughter board, but need...
I have a Nortel 81C system that is networked with 4 digit CDP to several remote sites.
I was routing some Distant steering codes and ran across a error that indicated that I have met the maximum allowable steering codes in the system.
Now may have to rethink how DNs are routed?
Is there any...
We have a Option 11c with 2 expansion cabinets. All three cabinets have the same individual back up battery system. (NTAK76AB)
We recently viewed the batteries a couple weeks ago to get the part numbers for a swap out.
This week one of the battery packs had become swollen, warped and appeared to...
Is there anyway to turn off the touch tones after a call is established so that the person placing the call doesn't hear all the tones when entering info on the keypad? This is a Nortel Option 11C with 2616 display phone. The user still needs to use the keypad after placing a call but doesn't...
Hi Tanselm,
Thanks again for your insight.
I think there are some dip switches on the card? I probably have gotten lucky on the ones that I installed in the past, somehow they worked. (but these were for tie trunks with d-channel.
Keep checking the tek-tips sight. My next project will probably...
Hi,
I am using a DTI/PRI card.
Part number NTAK09(BA).
Also have a downloadable d-channel daughterboard,and clock controller to put on this card.
I intend to move my clocking to this route once I have it all fired up and connected.
I didn't order a TMDI card because their existing T-1 card for...
Okay are you tired of my questions yet?
The card I am using for the Prime is a DTI/PRI not a TMDI.
I have downloadable d-channel daughter board and clock controller.
What do you do to turn on the DTI/ PRI other than enable it in load 60 ?
Thanks again to everyone for your expert help and...
I am thoroughly impressed with everyone's eagerness to help me accomplish this task. The unknown can be scary. You all get a vote from me for Tek Masters of the week.
Tek-Tips is awesome!
Thanks again to "Worldwidedialtone", "stonecoldphoneman", "Hawks", and "Tanselm". I hope to be knowledgable...
Thank you! STONECOLDPHONEMAN.
It is obviously apparent to you that I haven't built a prime before. I have built T-1 ties in the past, but always seem to forget some steps as time passes by. These also have a d-channel. I guess I am trying too hard and am wondering what the big difference is...
I am thinking that unless the voicemail is associated with key 00, you will have to activate an Xmwk key for that particular dn. Put in the VM center access DN and the monitored DN for the vm waiting. On some releases or versions the red lamp will come on even when the vm is not associated with...
I think I would try to activate the ICDA in the CLS on all the phones that the prime TN's Help Desk number appears on. That might do it? I run into the same problem occasionally when running a report through our call accounting system (INFORTEL) for windows. Probably won't hurt much to give it...
Thank You Mike.(worldwidedialtone)
Now I have a sch4788 while building the trunks.
(pri loop not configured with D-channel to provide b-channels. So, I am hoping this means I need to build the d-channel prior to building the trunks. I apologize in my delay in thanking you. I wasn't able to...
I am attempting to build an ISDN prime for a new bank of DID numbers for a site with an Opt. 11c.
The site has existing T-1 as tie trunks. So all the thresholds are established in ld 73. I am not removing the existing T-1 tie trunks. Here is what I have done
Cleared out the analog phones on...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.