I am attempting to build a PRI on an Option 11 release 4 using a TMDI card. I am using loop 29 in the second expansion cabinet. I used a dch 29 to match the loop. It appears the system has 64 total TMDI d-channels, so I figured that was okay. I have built the trunks, route, DLOP, DCH and wonder if I missed the boat on some programming? When attempting to enl the tmdi, or dch or loop, recieve an error. Now I am wondering if in fact I only really have 16 usable dchannels. Can someone give me some insight to my mistakes? I only work on T-1 builds occassionally and it seems I am forgetting something or have built my PRI incorrectly.
Here are my errors.
LD 96
.enl tmdi 29
MSDL016
.enl dch 29
DCH042
>ld 60
DTI000
.enll 29
DTI4135
.enl tmdi 29
DTI005
Your insight is greatly appreciated.
Harry
Here are my errors.
LD 96
.enl tmdi 29
MSDL016
.enl dch 29
DCH042
>ld 60
DTI000
.enll 29
DTI4135
.enl tmdi 29
DTI005
Your insight is greatly appreciated.
Harry