Search results for query: *

Andy, that was it - just didn't have it turned on in the vlans - thanks. Michael

Thanks Andy - I'll look into enabling the dhcp-relay broadcast mode on the vlan. That seems to be the part I'm missing. Appreciate the reply!

My customer wanted to separate their servers from their pcs so I built 3 (they have three different schools in their district) additional VLANs for them: (ALL TESTS WERE DONE ON THE 8300 – THE DHCP SERVER IS CONNECTED TO THE 8300.) VLAN - 20 172.19.1.1 School 1 VLAN - 21 172.20.1.1...

Thanks for the reply, I think we've got them talked out of it again and sold on the subnet per vlan solution.

I have a customer that is requesting multiple subnets on a VLAN. He has a Nortel 8310. I called my Nortel rep and he said it wasn't possible. The research I've done looks like it is called supernetting and since the VLANs havve an IP and Subnet mask it seems like it would be possible. Has...

I've got a call in to the tech, so I'm waiting to hear. They used it conjunction with a tone generator to supply tones over the loud speakers for start and end of classes.

Does anyone out there have a manual on this timer? We ran across it at a new customer and they are asking us to make some changes. They of course don't have the manual and I'm used to using a TOA timer.

Thanks for the help Biv, We double checked what you suggested and it looked good. We found that one of the AP's was bad out of the box and throwing everything off. Thanks again!

I have a BCM400 4.0 with a 2245, BAP-120 access points and 2 2210 handsets. Everything comes up and we can use them for a short while then I get a "watchdog timeout" error on the handsets and they reset. The BCM, 2245, 2210 and BAP-120's are all at current patches and firmware levels. All...

Thanks John and Firebirdscrambler! I'll pass this information on to the tech's. Ickthoose

I just had some tech's load an OPT11C with the default database prior to installation. They will be installing a CP server and will not using slot 10. The default DB comes up with MM in slot 10 and they need that slot for a trunk card. How do we reconfigure the slot!?! Thanks ahead of time.

I have a new BCM400 3.7 with all new patches. It supports about 90 digital phones and only 9 i2004 VoIPs fed by 8 analog CO lines. The 2004's are on their own network consisting of 2 Nortel 5520-24 switches connected via fiber. My issues are echoing only when the Voip's are connected to a...

Here's the fix: NAM was not completing it's boot. We verified that the DS30's laser was working and the NAM's wasn't, it would for about a second and then go out.This is one laser you can see, just point the fiber at a white piece of paper, it's red. Reseated the fiber XCVR card in the NAM and...

I have a NAM 4.0 working off an 8/24 using the DS30 for the last few years. Room overheated >100 degrees. Now the ports associated with the VM show up as unequipped. I can reset the NAM and the ports come up fine and then go back to not equipped. The 8/24 is working fine. The NAM comes up ok -...

Anyone out there know where I could get a Manual on the Norstar DS30 Station port adapter? Couldn't find anything on Nortel's site and ITAS couldn't find one either. Thanks ahead of time.

Can anyone send me a copy of this? My CallPilot training course refers to it but when I go on the web Nortel says it can't be found. Currently setting up a CC and having a few problems getting the skillsets to work properly. Thanks Guys

Got it, it turned out to be a corrupted profile. Thanks people

Correct Nortel20, but if the customer has a static IP that I can Telnet to, I should be able to then forward from that IP to the correct port of the CP, gaining access accross their LAN.

Charlotte, Can you expand on the "missing a file as entry." Can't seem to find it. Thanks

Using Outlook 2k. When I compose and new email and press the To: button. The address list that comes up does not have my all my Contacts in it. I can go to contacts and find it and email from there just fine. When I hit the To: button, I only have "contacts" as a choice. If I right...