Port number for CP100/150 access?

[Ickthoose]

Looking for the port number to open for access to the CP100/150's during a TELNET session. I'm able to TELNET into the customer but can't remember what the port number is for accessing the CP's admin page. Anyone out there know?

 

[Nortel20]

Point your web browser to

http://<IP

address>/CallPilotManager
where <IP address> is the IP address of the CallPilot

 

[Ickthoose]

Correct Nortel20, but if the customer has a static IP that I can Telnet to, I should be able to then forward from that IP to the correct port of the CP, gaining access accross their LAN.

 

[pbxphoneman]

I didn't think that CP had TELNET abilities.Just HTML,telephone & serial access.

 

[Daveyboy2]

Call pilots normally have an ip address of 192.168.110.10. You'll need a network card with a similar IP address (192.168.110.9 for example) to ping it and interface with it.

-= Beer is food! Is it suppertime? =-
If ya like the info on the posts - rate them helpful!