Search results for query: *

Thanks Stanhubble for the quick response but the TA does say download the driver from the mylex web site. I noticed that 506a does include mdac so I assume that its not suitable. I have to admit that this is not my op system, but a customers, and having caused such disruption by installing...

After installing rs506a with mylex controller the system fails to reboot with no root controller. This is described in TA 114743 on the SCO web site. It also provides the solution - booting unix.old and using btld to install a driver from http://www.mylex.com/support/productgd/index.html I am...

Sorry - the answer was for SCO unix!

Hi robmer, You are not the only one with EFS problems. I cannot answer your question about where HP are going but I have had problems which are resolved by GOING BACK to previous EFS releases - particularly when upgrading older machines. Just keep the CDS sent by Compaq and you can generate the...

Hi blabelle, I made the mistake of adding routes to thge S85tcp file which gets zapped when you do a netconfig. Now I create the file /etc/rc2.d/S88USRDEFINE (based on other files in the directory) and enter the add route commands. On 5.06 the /etc/default/tcp can be used - but I still stick to...

Hello abovebrd, What a mistake Caldera made pushing their own products! They really should have stated that SCO unix HAS a future initially - its a bit late now. We use UNIFACE 4GL to write our software and surprise - SCO doesn't play a part in their drivers so now we have to move to Windows...

Hi wonboondoo These are notes I made to set up PPP on SCO - its different for 5.06. They are for guidance only lines marked (eg) need your input! NOTE that the numbers entered will probably be different for you - modem IP addreses etc. PPP Setup – SCO UNIX 5.04 and 5.05 1. Configure modem...

Hi keenanbr, I dont believe that SCO supports files greater than 2Gb. The check is to enter: ulimit from root say and this will give the current maximum size of a file.

Hello All, As mentioned before by Jose - interesting. Regarding the UPS I recently installed a machine with COM1 as dialin and COM2 attached to a ups using APC software. As soon as the machine went to multi user mode it ran down again and I traced it to the UPS - so had I connected the UPS to...

apeasepc - The defbootstr is ok - and the dpti5 driver. Again thanks for the time spent in getting the details - totally confused myself with the driver required!!.

Thanks for the fast responses. I have tried the defbootstr suggested and loaded alad and ad160 (I disabled the blad aic7890 controller so its down to 3. After booting from the install CD : %adapter 0xFC00-0xFCFF 5 alad ha=0 %adapter 0xEc00=0xECFF 11 alad ha=1 then Warning hd: no root disk...

Machine Dell Power Edge 2400 Storage Controllers: Adaptec 7890 - no attached devices Adaptec 7880 - CDROM sci ID 5 - (install device) Adaptec 2940 - HP 4mm external Dat drive Adaptec 3210s- raid 5 with 4x9Gb drives Can anyone help please with information about drivers for the adaptec 3210s and...