Search results for query: *

admiralzino, Sorry for my silence. If you still interesting, this is my settings of SUBH3 (UMUX1500 analog subscribers card): Towards Exchange: Bits abcd On-Hook 1001 Off-Hook 0001 Ground 1101 From Exchange: Ringing 1101 Here abcd Bits...

I have MD110 BC10 with "Trading&Control Application" (radio-application). There are touch screen terminals CTT10CA, boards RLU2, RSU1, MDU2. The licenses indispensable for this application are: CTT-EXTENSION FAL104457 RADIO-EXTENSION FAL1040285 Who can answer - does...

admiralzino, "it it be a hardware problem?" - I don't think so... In this case, I think, you need to analize the AB-bits in 16TS of E1. Is Promina really send the SEIZURE-signal to MD? If you have PLEX, you can trace ELP7 (STxxx). Also you can use any hardware-analyzer of E1 with HI-impedance...

I am use ICAT=0000. Try it. I think, you must tune the line-signaling (AB-bits) of your Promina's analog card (if possible) to corresponding signalling diagram from ALEX. I did it in my case.

to slash50 "Maybe you could send the call from the group back out and in to DISA, but that involves cost and is very messy." - Yes, this solution is work, but this way is vary not optimise!!! I think, all must be made inside station. Any ideas? Thank.

I know two E/// solutions for your purpouse. First - device DLR-3. Consist of two parts: suscriber part and station part. Between them is twisted pair (max. distance is 3 km). Max. distance between DBCXXX & subscriber part and between station part & MD110 is 1 km. So, you can have the distance...

I am use CAS-ext. with UMUX-1300(board MEGIF - 2xE1, SUBLA - 12x analog subscribers) and UMUX-1500(LOMIF - 8xE1, SUBCH3 - 30x analog suscribers). I have not any problem. print here the ICAT Can you use the hardware analyser of E1?

BC10 CNI144 Is there are any way to provide the playing "Welcom Message" (RVA) and after that connect the call to DISA (*72*...)?

Hi ALL! I have the system VERSION=TA/LZY2035189/6/BC10C144/R6A I am in Russia. I want to use DISA without any authorisation code. I do: NANSI:NAMSE=1111,NUMTYP=DI; >EXECUTED ASPAC:PARNUM=184,PARVAL=3; >SURE? Y; >EXECUTED If I traed call from outside into the system, I receive the dial-ton...

Thanks to all!!!

to Radoje: Thank for your answer! A want use MD110 in combination with UMUX1500,1200(Ascom-Keymile) too! Please, say me, what hardware for MD110 and UMUX are need? For subscriber side of UMUX I suggest to use SUBH3... Is it correct?

Hi All! Any body known, is there are the way to remoute installation of DECT BS330, BS340 through any digital multiplexors? (Install BS on remote site through E1).

Who know, can MD110 work with V5.2 signalling??? If yes, which hardware (I suggest - TLU76/?) and software (UNIT) are need?

Plese, help me. I have some trouble. On MD110BC9 I have transit R2->EDSS1. Situation: 1.Doing a call from R2 to EDSS1 2.If MD110 don't receive from EDSS1 a signal ALERTING during establishing a call, then subscriber on R2 don't hear ringing tone. If ALERTING is already received, then ringing...

Hello All! Please, help me. I very need the file LIM-disposition for MD110 BC9 with "Trading and Control Application" (boards RLU2, RSU1, VRU, MDU2, ELU28). Thank.