Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

RVA + DISA ???

Status
Not open for further replies.

maxl

Technical User
Nov 20, 2002
15
RU
BC10 CNI144
Is there are any way to provide the playing "Welcom Message" (RVA) and after that connect the call to DISA (*72*...)?
 
I don't think so. As far as I know the DISA number can only be accessed from an external call, not internal.

My thoughts would have been ot initiate a group hunt with an RVA welcome message then have a member with a hard divert to the DISA number, but I don't think this will work. Maybe you could send the call from the group back out and in to DISA, but that involves cost and is very messy.
 
to slash50
"Maybe you could send the call from the group back out and in to DISA, but that involves cost and is very messy." - Yes, this solution is work, but this way is vary not optimise!!! I think, all must be made inside station.

Any ideas?

Thank.
 
Don't think it can be done then. Maybe set up an operator corg with no members that reroutes to DISA, and have an RVA message on that??? I have no idea if that'll work.. I'm thinking it probably won't.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top