Search results for query: *

Yes the star works when nvm is used. i still have cp user interface though.

i have a t7316 with a t24 basic kim with dn numbers on it. i can transfer a call by pressing the softkey transfer button then the dn button on the kim and the call is transfered. however when i answer a call and use the voicemail transfer button or feature 986 i cannot transfer via the kim only...

I PROGRAM FLASH AND NAMS TO RETURN TO AUTO ATTENDANT. I USUALLY SET UP A GREETING IN THE GENERAL MAILBOX 100 TO SAY YOU HAVE REACHED THE GENERAL MAILBOX PRESS THE STAR KEY TO RETURN TO THE MAIN MENU OR REMAIN ON THE LINE TO LEAVE A MESSAGE THAT WILL FORWARDED TO THE APPROPIATE PERSON. ON CALL...

I had to replace the standard hold feature and release keys with replacemaent button caps that say hold release feature on 300 telephones. it cost me $3.31 per phone to get them made. now i have a happy customer

How can i make the park call back display where the parked call is coming from. ie. 101 102 103 etc. This would help identify the party on the line so the operator does not answer with the standard company name instead she would address the person she has parked by there name.

I have a mics 6.0 with call park orbits 101 125. if the call is parked at the reception 7324 and not picked up it recalls after 60 seconds to the intercom button and says park callback but does not tell you what park code it is returning from so the receptionist answers it like an incoming...

lines 25 26 27 28 no go with dial tone . changed to pri in programming under maintenamce then hardware. moved pri to slot wher lsds was pri works in this slot. moved lsds to old pri slot reconfigured to loop start card NO DIALTONE 1 2 3 4. MOVED CARD TO MODULE 8 ALL OK. I AM JUST GOING TO...

I BOUGHT AN AMPLIFIED HANDSET FOR A M7324 ASH AND T7316 CHARCOL AT SHOPNORTEL.COM. THEY WORKED OUT WELL.

i HAVE A 0X32 WITH MICS 4.1. a PRI CARD CHANNELS 1 TO 23 PRI A. LINES 25 TO 28 ARE IN POOL B LOOP START. WHEN YOU ACCESS THESE LINES VIA A ONE TOUCH ON THE 7324 YOU GET LINE SEIZURE BUT NO DIAL TONE ON ALL TRUNKS. WHEN YOU MOVE THE DS CARD TO MODULE 8 LINES 57 58 59 60 ON CARD 2 THEY WORK FINE...

I had a problem like this. i went into the nam 4.1 and turned off redirect dn feature and it solved the issue.

ok no hunt groups installed and distinctive ring set to none all sets. when you touch any phone in the system using feature star 6 it will not let you change the ring. when you touch next it does nothing, when you touch buttons 2 or 3 or 4 its says not allowed. Bizzare!! tahank you for...

all phones in the system are affected and none have set lock capability turned on.

i have an na 6.0 mics xc. the ring choices under feature star 6 upper left key soft button to chose 1 to 4 for distinctive ringing does not work. the target line is set to distinctive ring none. cannot change ring even if i press 1 to 4. it says not allowed. i can change distinctive ring on...

in bcm release 3.5 it has enhanced answer dn applications. does anyone know if a message waiting indicator for this dn can be programmed on a t7316e.

does anybody know if na mics 6.0 xc can be upgraded to cda 6.1 xc without losing programming. according to a nortel distributer they say mics 6.1 xc cda is exactly the same as na 6.1 xc and nortel are only producing cda 6.1 xc. i would hate to try and replace the pmcia card into the same nvram...

Thanks exmogger, looks like this solved the problem after initial testing thank you

THE CALL COMES IN AND IS ANSWERD BY THE 7324 OPERATOR IT ARRIVES ON TARGET LINE 156. THE OPERATOR TRANSFERS TO AN EXTENTION USING THE TRANSFER SOFT KEY ON THE 7324 AND THEN THEN ONE TOUCH EXTENTION BUTTON ON THE KLM TO EXT 250.IF THE CALLER GETS THE RECIPIENT VOICEMAIL MESSAGE THEY HIT ZERO TO...

i have a 6.1 mics xc with a 4.1.5 nam. according to the book each phone can send a maximum of 4 messages to other phones with the exception of the phone associated with the cap module. it is supposed to be able to send up to thirty messages. i reset the cap module asignment for the 7324 and it...

I have a nam 4.04c 8 port with amis networking i have successfully transferred all the data from the system using back up and restore via f983. to my newer 16 port nam 4.04c. i have restored a backup from f915 server adin and restored that. however the (ne application that appears next to ccr...

how can i put feature 981 plus password on a one touch button. i was not able to do it on a personal speed dial or system speed dial how can i make a message waiting light appear next to ananswer dn on my phone so i can tell if the extentions i am answering for has messages i can do it on my...