Search results for query: *

Hi, I need a working sample for priority-list command. Any reference or post is appreciated. Thank you

routerman, My webserver is a Windows 2000 advanced server machine. It's default gateway is not directly set to any interface of my local router. Thank you for your help. I'll try that and let you know. Experimenter

What may cause the command &quot;ip nat inside source static <inside_private IP> <inside_puplic IP>&quot; not to work when I can ping inside_public IP from the Internet but the web service running on the inside_private machine can not be found from outside network when I type...

1. line vty 0 4 2. no password 3. ^Z Experimenter

Would you please give a try to ip nat inside source static tcp <web_server_IP> 80 <tunnel_int i.e t0,t1,...> 80 Experimenter

Hi Paul, Required module and configuration depends on your E1 signaling type. http://www.cisco.com/univercd/cc/td/doc/pcat/cht1isp1.htm http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/dialts_c/dtsprt3/dcdchant.htm Experimenter

What is your email server IP? 99.99.9.26 or 99.99.99.26? Also are you ruse DNS resolution is not denied for that IP? Experimenter

Your router is unable to detect the status of your VSAT link because it's connected to an ethernet interface. So you need the same dynamic routing protocol in the other side of VSAT link to listen/send advertizing packets. Then you can enforce router to obey your routing priority rules. Bests...

Hi Paul, If your issue is assigning a dedicated IP address you or better to say your ISP should assign that or permit you to pick up a predefined IP address. It depends on the type authentication, authorization and accounting protocol, for instance a PPP Framed-User in Radius protocol can get a...

I did. Thanks webnetwiz. Experimenter

interface VLAN1 ip address 172.16.1.103 255.255.0.0 no ip directed-broadcast no ip route-cache ! interface VLAN2 ip address 10.15.15.99 255.255.255.0 ip helper-address 10.15.15.100 no ip directed-broadcast no ip route-cache shutdown How to remove shutdown in VLAN2? Switch is a 2950...

AccessXP, Cisco IOS has a limited built-in web based interface, also some utilities like ConfigMaker and CiscoWorks; But IPKONFIG is rather right. You need good knowledge to configure a Cisco box correctly and you will find Cisco command prompt the best tools, after that its reliablility lets...

Paul, I gave a try to solution on my VoIP GW. Now I can practically say it works, 100%. So it won't work on MICA modems. Hope that I could help. Good luck Experimenter

Hello All, I get an error message like &quot;DDL error, C:\WINNT\TEMP\GLC43.tmp is not a valid windows image&quot; which causes my email server to stop. I use MDaemon and it cleans up unnecessary files in the midnight. This error message appears then. Anybody has an idea? Thanks. Experimenter

Sure paul, MTA command set requires VoIP hardware. On your 3640 for instance NM-2V and NM-2FXO/S might be used. Of course I'm new in it and my knowledge is based on what I understand from Cisco articles you redirected me to and some others, so you might want to talk to a person with hands on...

Friends, I have installed service pack 4 and some other windows 2000 patches. Do you think that's the reason ? Experimenter

Hello sutini, You might want to make sure of DNS settings. Experimenter

Dear Paul, You are right about solution but I'm afraid that MICA modems are not right tools for that purpose. You will need VoIP modules. Experimenter

collete, You can put your firewall on ISA or Cisco box with mapping a private range IP to a public IP and giving permission to certain ports. In ISA see server publishing and in Cisco follow the command below: ip nat inside source tcp source xxx.xxx.xxx.xxx [port #] yyy.yyy.yyy.yyy [port #]...

Paul, I think that off-ramp term belongs to VoIP and faxing on VoIP modules not normal analog or digital modems. If you let me know the URL of mentioned solution in Cisco.com, It may be helpful for both of us. Thank you Experimenter