Search results for query: *

Thank you for the information. It is a small office and there are two desks that are back to back, with the phones less than five feet apart. I will let you know what happens after the holidays when we get back in the office.

Recently installed a MICS system and we are getting feedback(loud screeching noise) when paging. We are using the sets only (no overhead speakers) and get feedback on all phones. We have lowered the volume to the lowest setting on all the phones but the problem persists. Has anyone run into...

Thanks for your replys. I will check them out!!

At my previous job, I used the Siecor Uni-cam (no expoxy) termination kit for fiber terminations. I got fairly confortable using that kit. My question is: Can anyone suggest a better or different kit to use? I saw that Leviton and 3M also have similar kits. Thanks!

I had a customer tell me that I was way high on my estimate, so I just wanted to check with the experts. Thank you all for your reply's. They are of great help!!!

Question: If you were to install individual LAN, phone and coax cable into a single gang box from a wiring closet, would you charge as a single line installation or as three different lines? Thanks!

If you connect your fibers like you mentioned, you will not have any extra capacity at all on the 850'leg. You are probably better off running the 3 homerun cables and then you don't have to worry about db loss either.

The port was active and functioning and suddenly just died. I will re-boot the module this weekend and hopefully it will come back up. I also looked in maintenance and the port was enabled, I disabled the port and then re-enabled it, but still no dial tone. Thanks for your reply's. All have...

Recently, I had a fax machine that had no dial tone and after investigating the problem found that the port(07) had no dial tone. Fortunately I had another port and moved the wiring over to that one to fix my problem. My questions are: Is this common? and Can I do anything to...

I tried 4500-4900 and still will not work. It goes up to 4399 and stops there. Thanks.

Yes, I am going into system programming and then to "change DN"

I installed a new phone and I while trying to change the DN the system would not let me change the number to what I wanted. It defaulted to 2144 and I wanted to change it to 4439, to match the DID. It will let me change it to the 4300 series but not the 4400 series. Thanks for your help in...