Search results for query: *

Has anyone tried "codeweavers crossover" http://www.codeweavers.com/products/office/ to run vision under linux? any experience please post. Visio is the only app holding me back to switchfrom M$ to Linux.

The AP600 replaced the AP450. I had the same problem on a 450 ones. You have to connect a terminal(emulator) to the serial port with the console cable. recycle the AP and during boot you can break into the boot prompt, with I believe a Control-C. But it'll show you the message. once in a boot>...

goto : http://www1.avaya.com/enterprise/resourcelibrary/ and select "application notes" lots of examples! if you need more help let me know. regards, Peter

I need to deploy a VoIP link over a satellite. I have used cisco before. However I would like to see how Lucent's MAX VoIP solution works and performs, since they seem to be cheaper. Has anyone had the opportunity to compare the voice quality between Cisco 5300 and Lucent MAX 6000, using...

Yes I did get it to work. Forget the AT commands as in the manual!!! I used a standard 28.8/33.6 USRobotics, factory default and set the external dip switches as follows : 1 - down Data Terminal ready override 2 - up Verbal Result codes 3 - up Suppress result codes 4 - down No echo offline...

Since release 9.5 the definity supports T.38 fax. Does this mean I can hook up a T.38 enabled fax machine to my all IP network and send/receive faxes? Or does it mean a regular analog fax can be send over IP trunks between PBX's? anyone experience with this? if I can use T.38 faxmachines, does...

I have evaluated some Call Accounting systems recently, and found the Veramark Ecas platform the most versatile. and it's Avaya's preferred call accounting system. Contact me if you need some details pfischer@atmit.com

Increase your knowledge, get certified, and get specialized in the new trends in technology such as convergence. Get your employer depend on you, then: QUIT YOUR JOB, start a company (doesn't cost much) Have your previous employer hirer your company for consulting. Charge them by the hour. Find...

How about free? try MRTG

I have some old Forerunner OC3 NICs, but lost the drivers. Does anyone know where to get drivers?

I remember I had two Fore ethernet switches (don't remember the model) with OC3 uplinks. Normally you connect it to an ATM switch, But I got them to work together by using a cross over fiber cable. This was a long time ago, don't remember the details. Peter.

First determine if you want the box to be a router or a bridge. bridge is default assign an ip address to one ethernet port: add ip.1 address.x.x.x.x (this assumes that your ethernet port is the first port) now you could administer the box through a web-browser. but if you prefer command line ...

Slowly, I get more information on this subject. It seems that the Definity uses a specific protocol for the CDR over IP called "Definity Reliable Session Protocol". The problem is that Veramark only supports the "unformatted" format for CDR's, and thus I can't use the...

I'm still looking for a call accounting that will support multiswitch Definity IP network. One central site and several remotes tight together over IP Trunks. The central site has PSTN connectivity and all remotes use this switch to go off-net (toll bypass, whatever you want to call it). I need...

thanks for the reply. I was hoping to find something that would be able to automate this and have a tighter integration.

Is there a call accounting system or CTI application, that will allow me to set a dollar limit per extension? in other words, I don't want users to make calls worth more than for example $20.00 after this it either disconnects them or lowers their restriction to local calls only.

Hi all, Can't get the modem to work connected to the console port on the CPU. I entered the required AT commands in my USrobotics as the manual indicates. The modem answers, but no login! I'm using the standard console cable with the DB25 connector. regards, Peter

Hi all, I'm new to this forum. We are an Avaya BPartner in Miami. I have a customer with several sites, all G3's IP enabled. rel10. From a central site I want to collect CDRs from all switches over IP. Avaya sent me a small tool to gather CDR records over IP and store in a file, but it doesn't...